Análise do desempenho do gráfico de controle do desvio do nominal em pequenos lotes de produção
Resumo
Since originally proposed by Shewhart in the 1920s, control charts are widely used by manufacturing companies to monitor and control production processes. The purpose of the control charts is to detect special causes so that corrective actions are taken, whenever necessary, ensuring stability and capacity to the process. Over the years, production systems have changed. The concept of lean manufacturing has gained more space and the use of Shewhart control charts in these environments has been questioned. Specific methods were developed from there, due to the possibility of fundamental assumptions violation and unavailability of data for an accurate parameters estimation. Among the main specific methods, there is the deviation from nominal control chart. However, Montgomery (2014) highlights some essential aspects, such as, for example, the influence of process variation on its performance. This work studies the effect of parameters estimation and the influence of process variation on the deviation from nominal control chart performance through the Average Run Length (ARL) method and proposes some adjustments on the control limits so that its use is optimized in small production batches. For this, the research method used was modeling and computer simulation. The results found validated the propositions presented by the literature, verifying that the control charts built with estimated parameters, instead of known ones, present a lower performance than expected. There was a significant influence of the process variation on the performance of the control chart. However, it has also been demonstrated that small adjustments on the control limits can make it enable on lean manufacturing environments.
Collections
Os arquivos de licença a seguir estão associados a este item:
Exceto quando indicado o contrário, a licença deste item é descrito como Attribution-NonCommercial-NoDerivs 3.0 Brazil
Itens relacionados
Apresentado os itens relacionados pelo título, autor e assunto.
-
Simulação da dinâmica do controle de carga: controle de entrada/saída com realimentação
Oliveira, Allan Freitas (Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 22/06/2021)With the growing need for a fast response to the demand disturbances, dynamic models rise as an alternative to discrete events simulation, usually used on the application of Workload Control rules. However, applications ... -
Análise de desempenho de trajetória de AGV seguidor de linha usando controle Fuzzy adaptativo
Rodrigues Junior, Flavio Antonio (Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência da Computação - PPGCC, Câmpus São Carlos, 17/08/2017)Dynamics of automatic vehicle movement (Automatic Guided Vehicle), its associated with your control system, and the adoption of traditional control techniques, whose parameter and tuning are performed based on linear ... -
A modelagem de gráficos de controle de aceitação condicionados aos índices de capabilidade de processos : uma abordagem prática e econômica
Costa, Fabrício martins da (Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Engenharia de Produção - PPGEP, Câmpus São Carlos, 07/07/2017)Modified and acceptance control charts allow a new approach to statistical process monitoring. This research topic is little explored in the academic world, thus, this thesis contributes to the advancement of statistical ...