Search
Now showing items 21-30 of 46
Aspectos termodinâmicos e cinéticos do uso de plugues porosos para a remoção de partículas cerâmicas por bolhas inteligentes
(Universidade Federal de São Carlos, 2021-04-19)
Non-metallic inclusions can spoil the mechanical properties of the steel depending on their composition, geometry, size and distribution. In this context, “inclusion engineering” is a rising area in steelmaking industry ...
Development of ionic conductive cellulose mat by solution blow spinning and laser-induced graphene from pineapple nanocellulose for use in flexible electronic devices
(Universidade Federal de São Carlos, 2021-02-26)
In the face of environmental issues and aiming at electronic devices of
rapid production at low cost, this doctoral thesis proposed two new and
innovative approaches to obtain substrates, dielectrics, and electrodes from ...
Equilíbrio de fases e propriedades mecânicas da liga de elemento multiprincipal Cr40Co40Ni20
(Universidade Federal de São Carlos, 2021-02-19)
In the pursuit for materials with improved performance, multi-principal element alloys (MPEAs) attract the interest of the scientific community, due to their large composition space. Some Cr-Co-Ni alloys stand out with ...
Relaxação estrutural de vidros metassilicato de chumbo e dissilicato de lítio
(Universidade Federal de São Carlos, 2021-02-25)
Glasses are thermodynamically unstable and spontaneously relax towards the supercooled liquid state. The relaxation time varies from seconds at temperatures above the glass transition to geological times at room temperature. ...
Avaliação dos modelos numéricos para a simulação da secagem de concretos refratários
(Universidade Federal de São Carlos, 2021-02-25)
The drying of hydraulic bonded monolithic refractories is the slowest stage of their application process. Problems related to the control of such a procedure result in cracks, spalling and even, in extreme cases, explosions ...
Avaliação da integridade superficial de insertos retificados da liga WC-Co para ferramentas de corte
(Universidade Federal de São Carlos, 2021-05-11)
Cutting tools produced from cobalt tungsten carbide alloy (WC-Co),
compared to conventional cutting tools, provide lower cost of machining, with
increasing productivity and acceptable combination of hardness and ...
Efeito da adição de Al e C na evolução microestrutural e no comportamento mecânico de aços austeníticos de baixa densidade com alto teor de Mn
(Universidade Federal de São Carlos, 2021-05-20)
Low-density steels are advanced materials that are being developed mainly for the automotive industry to reduce the structural weight of cars. The most common studied compositions comprise FeMnAlC variations, in which both ...
Efeito da microadição de oxigênio na estabilidade microestrutural da liga Ti-29Nb-13Ta-4,6Zr processada via deformação plástica severa e envelhecimento
(Universidade Federal de São Carlos, 2021-02-24)
Gum Metal corresponds to a family of β-Ti alloys that are currently receiving great attention due to its outstanding properties such as low elastic modulus, superelasticity, and high tensile strength. These alloys show ...
Avaliação das microestruturas de solidificação e propriedades de aplicação de ligas monotéticas Al-Bi, Al-Bi-Cu e Al-Bi-Zn
(Universidade Federal de São Carlos, 2021-06-16)
Monotectic Al-based ternary alloys can result in a good combination of wear resistance and mechanical strength. While the soft self-lubricating elements contribute to an appropriate wear resistance, modification with third ...
Caracterização eletroquímica do eletrólito sólido NASICON Li1,5Al0,5Ge1,5(PO4)3 (LAGP)
(Universidade Federal de São Carlos, 2021-08-17)
Solutions to the environmental and social challenges of postmodern society converge on a common point: sustainability. Doing more with less and using environmentally friendly materials is imperative. Energy storage is ...