Buscar
Mostrando ítems 1-10 de 21
Reciclagem de embalagens flexíveis multicamadas
(Universidade Federal de São Carlos, 2022-04-29)
Packaging industry is facing an important paradox in flexible plastic packaging for fresh food. While, food waste is avoided using multilayer and multi-material structures with barrier properties, that increase shelf life ...
Desenvolvimento de biocompósitos de poli(ácido láctico) e óxido de zinco modificado por plasma para aplicação em engenharia de tecidos
(Universidade Federal de São Carlos, 2023-05-30)
The increase in the incidence of bone fractures and trauma with the aging of the population has been driving the development of materials for bone repair with better mechanical and biological properties. Therefore, the ...
Desenvolvimento e caracterização de biocompósitos de blendas TPU/PCL com hidroxiapatita para produção de scaffolds bioativos via impressão 3D
(Universidade Federal de São Carlos, 2022-08-02)
The increasing need for biological tissues to treat defects caused by disease or injury has demanded new solutions to provide functional substitutes that supply tissue shortages and suit the needs of each patient. In this ...
Desenvolvimento de compósito epóxi/fibra de vidro produzido por enrolamento filamentar para revestimento interno de coluna de produção de petróleo em aço carbono na exploração offshore
(Universidade Federal de São Carlos, 2021-08-04)
Epoxy/glass fiber composites (GRE) were produced by filament winding with a view to application as a liner in a carbon steel tube to replace all-metal super duplex stainless steel column in offshore petroleum exploration. ...
Atomização a gás do aço ferramenta A2: efeito dos parâmetros de processo nas características do pó
(Universidade Federal de São Carlos, 2022-03-23)
Gas atomization is the main method in powder metallurgy to produce powders for additive manufacturing (AM). The gas atomization process allows generally spherical and very fine metallic powders with great yield on the ...
Sistemas de estabilização em polipropileno submetidos à radiação UV-C
(Universidade Federal de São Carlos, 2023-04-28)
UV-C radiation (200 - 280 nm) is a range of the electromagnetic spectrum with increasing and satisfactory studies as a method of disinfection against microorganisms, however, it is little studied in terms of degradation ...
Análise de falha de martelos oscilantes de desfibradores utilizados em usinas sucroalcooleiras
(Universidade Federal de São Carlos, 2021-07-30)
Sugarcane mills have demanded more control of their production line,
reduced loss of raw material, and a longer period before maintenance of their
equipment, aiming to increase their profitability. The main station of ...
Síntese de Mg2NiH4 para armazenagem de hidrogênio em compósito polimérico
(Universidade Federal de São Carlos, 2021-03-01)
In this work, powder production routes based on Mg2NiH4 are investigated, utilizing high-energy reactive milling; thermal treatment procedures, and hydrogen absorption/desorption cycles, which promote controlled decrepitation, ...
Recobrimentos de ligas Ti-Nb-Zr depositados por pulverização magneto-catódica sobre aço inoxidável AISI 316L para aplicações biomédicas
(Universidade Federal de São Carlos, 2022-11-30)
The work consists of the deposition of Ti-Nb-Zr ternary alloy coatings in the form of thin films on an AISI 316L stainless steel substrate for applications in the biomedical area, such as dental or orthopedic prosthesis. ...
Análises térmica e energética no pré-aquecimento do revestimento refratário de panelas de aciaria via métodos numéricos e experimentais
(Universidade Federal de São Carlos, 2022-04-28)
Preheating the refractory lining of industrial equipment usually consumes substantial amounts of energy. This step is usually time consuming and impacts the costs and productivity of several economic sectors. Therefore, ...