Search
Now showing items 61-70 of 92
Indicadores de produção científica para prospecção tecnológica em manufatura aditiva de biocerâmicas
(Universidade Federal de São Carlos, 2019-05-31)
In the Bone Tissue Engineering, biomaterials are used as scaffolds to produce a support and cell growing. Because of the similarity to the bones cells, ceramic compounds are the main materials used to produce the scaffold. ...
Degradação em processamento, cinética de cristalização e policondensação no estado sólido de poli(ácido láctico)
(Universidade Federal de São Carlos, 2018-08-31)
In this work, the degradation of poly (lactic acid) (PLA) within conditions
of high temperature, shear stress and humidity was studied. In addition to that,
the crystallization kinetics of these degraded materials was ...
Controle da hidratação do óxido de magnésio: fundamentos físico-químicos e aplicação tecnológica
(Universidade Federal de São Carlos, 2016-08-24)
Magnesium oxide has been proposed as an alternative binder to calcium aluminate cement in refractory castables with reduced amount of CaO. The binding effect is generated by the MgO hydration, resulting in brucite [Mg(OH)2]. ...
Avaliação de matérias-primas alternativas com ação ligante ou sinterizante para concretos refratários
(Universidade Federal de São Carlos, 2020-08-05)
Refractory materials are used as linings in most equipment of heavy industries. As the latter are continuously seeking to reduce expenses in order to increase their energy efficiency and productivity, the evaluation of ...
Otimização do processo de secagem de concretos refratários
(Universidade Federal de São Carlos, 2020-08-11)
The drying step of hydraulic-bonded refractory castables is usually carried using conservative and long heating schedules, in order to preserve the microstructure of dense ceramic linings and inhibit explosive spalling ...
Regeneração de rejeito espuma de SBR através de extrusão no estado sólido e incorporação em SBR virgem
(Universidade Federal de São Carlos, 2017-09-29)
The objective of the present work is the study of the recycling of vulcanized rubber foam waste from the footwear industry through the solid state extrusion process known as Solid State Shear Extrusion (SSSE). The industrial ...
Aspectos termodinâmicos e cinéticos do uso de plugues porosos para a remoção de partículas cerâmicas por bolhas inteligentes
(Universidade Federal de São Carlos, 2021-04-19)
Non-metallic inclusions can spoil the mechanical properties of the steel depending on their composition, geometry, size and distribution. In this context, “inclusion engineering” is a rising area in steelmaking industry ...
Obtenção do sistema nanoestruturado livre de chumbo (Na0,5Bi0,5)0,94Ba0,06TiO3 (NBT-BT6) via rotas químicas
(Universidade Federal de São Carlos, 2020-09-16)
Perovskites based on sodium bismuth titanate (Na0.5Bi0.5TiO3) are
promising candidates for replacing some ceramic materials based on lead due
to piezoelectric properties. The solid solution 0.94(Na0.5Bi0.5)TiO3-0.06BaT ...
Desenvolvimento de vitrocerâmicas com estrutura NASICON condutoras por íon sódio da família NaGe2(PO4)3
(Universidade Federal de São Carlos, 2015-11-30)
Sodium batteries have a promising future owing to the low cost and abundance of sodium in nature. This growing interest has led to the quest for materials to optimize and improve the operation of these devices. Among the ...
Relaxação estrutural de vidros metassilicato de chumbo e dissilicato de lítio
(Universidade Federal de São Carlos, 2021-02-25)
Glasses are thermodynamically unstable and spontaneously relax towards the supercooled liquid state. The relaxation time varies from seconds at temperatures above the glass transition to geological times at room temperature. ...