Buscar
Itens para a visualização no momento 11-20 of 56
Influência da compatibilização interfacial seletiva nas propriedades mecânicas de compósitos híbridos ternários de PET/fibra de vidro/elastômeros olefínicos reativos
(Universidade Federal de São Carlos, 2009-09-25)
Poly(ethylene terephthalate) (PET) is a semi-crystalline thermoplastic widely used for packaging of aereted soft drinks, which makes the recycling of post-consumer PET material necessary to prevent the negative environmental ...
Avaliação de um critério de equivalência entre dados de tração a quente e fluência em aços
(Universidade Federal de São Carlos, 2007-05-28)
This work was conducted in four stages, the first to understand the phenomena that affect the 2.25Cr-1Mo steel hot tensile in different conditions, observing their behavior in a wide range of temperature and strain rates, ...
Propriedades mecânicas de tração e impacto dos aços inoxidáveis CA15 e CA6NM
(Universidade Federal de São Carlos, 2007-02-27)
The subject of this work was to study the mechanical properties, based in tensile and impact tests, of two stainless martensitic steels cast under designations of ASTM Standards, namely the CA15 steel, a steel with 12% of ...
Avaliação do dano por choque térmico em concretos refratários via espectroscopia acústica ressonante não-linear
(Universidade Federal de São Carlos, 2012-03-02)
In this thesis the Non-linear Resonant Acoustic Spectroscopy Technique used to evaluate the mesoscopic non-linearity was incorporated into the Impulse Excitation Technique, which is extensively applied to the evaluation ...
Processamento, caracterização microestrutural e avaliação das propriedades mecanicas da liga Al92Fe3Cr2Mn3
(Universidade Federal de São Carlos, 2008-09-08)
Aluminum alloys having a particle dispersion in nanometric scale, which present elevated values of mechanical strength at both ambient and high temperatures have been studied for some time. These alloys are known for ...
Estudo da solidificação do aço rápido M2 em diferentes lingotes e seus efeitos na microestrutura e propriedades mecânicas finais
(Universidade Federal de São Carlos, 2011-08-03)
The high speed steels are mostly applied in cutting tools, like drills, cores and top milling cutter. Its microstructure is composed by martensite, with high hardness, strong tempering resistance and disperses carbides on ...
Avaliação da qualidade final de juntas dissimilares de ligas de alumínio 2024-6056 e 7075-6056 soldadas por FSW - friction stir welding
(Universidade Federal de São Carlos, 2006-03-31)
The aeronautic industry has been studying the FSW (Friction Stir Welding) process since its development by TWI (The Welding Institute), in 1991. Nowadays it has been used in the airplanes fuselage of the Eclipse Aviation ...
Microestrutura e propriedades mecânicas de ligas Al-Si hipoeutéticas conformadas por spray.
(Universidade Federal de São Carlos, 2005-06-29)
The aims of this work were the microstructural and tensile properties
characterization of the hypoeutectic spray formed Al-Si 319 and 380 alloys. The
alloys were melted by induction furnace, gas atomized with nitrogen ...
Efeito do inoculante Al-Nb-B na microestrutura e propriedades mecânicas da liga AA2017 fabricada por fusão em leito de pó a laser
(Universidade Federal de São Carlos, 2023-01-24)
The blending of finer powders of Ti, Zr, Ta, Sc, and Nb compounds as inoculants has been a promising strategy to modify precipitation-hardened aluminum alloys for laser-based powder bed fusion process (L-PBF), promoting a ...
Influência da nióbia no óxido de alumínio eletrofundido para aplicações abrasivas
(Universidade Federal de São Carlos, 2021-07-29)
Abrasives are materials that have as main characteristics their cutting and
grinding power. In its most common crystalline form, aluminum oxide, due to its
high melting point, high hardness and mechanical resistance, ...