Search
Now showing items 1-10 of 17
Estudo da resistência à fadiga da liga Ti-6Al-4V com superfície modificada por tratamento químico
(Universidade Federal de São Carlos, 2016-03-22)
Chemical surface treatments (CST) in cementless and endosseous
implants are used to increase the implant-bone contact area, reducing the period
of osseointegration and favouring bonding ability between implants and ...
Avaliação do comportamento mecânico de nanocompósito de PEEK/nHA sob curta e longa duração para aplicação como biomaterial
(Universidade Federal de São Carlos, 2012-04-27)
The main objectives of this dissertation were to study the short (tensile and impact) and long-term (fatigue) mechanical behavior of nanocomposites of poly(ether-ether-ketone), PEEK, with nanohydroxyapatite, nHA, for ...
Durabilidade mecânica de compósitos de polipropileno com reforço híbrido de fibra de coco e talco
(Universidade Federal de São Carlos, 2012-08-13)
The use of natural fibers, as possible alternative reinforcement for synthetic fibers such as glass fibers, in polymer composites meets the requirement for development of new materials with environmentally sustainable ...
Refill friction stir spot welding of AA6016-T4 aluminum alloy: study of new load-controlled process
(Universidade Federal de São Carlos, 2020-06-29)
Aiming at structural weight reduction and energy efficiency, aluminum alloys have been considered as potential materials for automobile manufacturing. The development of technologies able to join aluminum alloys more ...
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...
Avaliação da resistência à fadiga e caracterização microestrutural de fios extrudados e forjados da liga AA7050 reciclada por conformação por spray
(Universidade Federal de São Carlos, 2016-12-19)
High strength 7XXX precipitation hardened aluminum alloys are widely
used in aircraft structural components. The machining process applied in the
fabrication of these components is a low efficiency ...
Deformação plástica severa em temperaturas ambiente e criogênica, de Ti comercialmente puro
(Universidade Federal de São Carlos, 2015-01-28)
One of the most probable fields of applications of Severe Plastic Deformation (SPD) processes is that of biological implants, and the most investigated metallic material in this context is titanium and its alloys. The ...
Resistência à fadiga de junta circunferencial de um tubo API 5L x 70 em contato com etanol
(Universidade Federal de São Carlos, 2016-09-19)
Circumferential field-welding joints of oil pipelines are susceptible to defects that may lead to failures when in operation. The type of product to be transported is an important factor in the evaluation of environment-induced ...
Mechanical properties and metallurgical characterization of AA6082-T6 alloy welded by refill friction stir spot welding
(Universidade Federal de São Carlos, 2019-07-30)
The efforts to produce automobiles with intense use of aluminum alloys is growing and the 6XXX series of aluminum alloys are important for this scenario. However, the current joining technologies applied in these alloys ...
Comportamento mecânico em fadiga da liga de titânio beta metaestável Ti-5553
(Universidade Federal de São Carlos, 2016-10-14)
The microstructure of metastable beta Ti alloys is a decisive factor that
governs their properties and, therefore, the assessment of the relation between
the microstructure and the fatigue response means an advance in ...