Search
Now showing items 1-10 of 45
Crescimento super e subcrítico de trincas em vidros e vitrocerâmicos analisado via indentacão
(Universidade Federal de São Carlos, 2012-07-02)
In this dissertation we quantified properties that may better describe the mechanical behaviour of different glasses and glass-ceramics of the Na2O-CaO-SiO2-P2O5 system, based on the Biosilicate®chemical composition developed ...
Simulação computacional, projeto, construção e análise do desempenho de uma matriz para extrusão em canal angular dedicada ao processamento de chapas
(Universidade Federal de São Carlos, 2012-08-29)
The present work describes the design, construction and testing of an equal channel angular pressing (ECAP) die characterized by rectangular cross section channels. The main parameter of the ECAP dies is the geometry of ...
Módulo elástico como ferramenta para o acompanhamento de transformações in situ e desenvolvimento de concretos refratários
(Universidade Federal de São Carlos, 2012-09-12)
Refractory castables are multiphase materials usually exhibiting complex heterogeneous microstructures, which have their mechanical strength affected by chemical and structural changes. These microstructural changes directly ...
Avaliação de modelos de sinterização por fluxo viscoso e determinação da taxa de crescimento de cristais e fração cristalizada em vidros
(Universidade Federal de São Carlos, 2012-08-16)
Glass-ceramics are materials obtained from the controlled crystallization of glass. The properties of these materials are controlled by the nature and proportions of the crystalline phases and residual glass present. ...
Estudo do processo de soldagem por fricção por ponto da liga de magnésio AZ31
(Universidade Federal de São Carlos, 2012-08-17)
The great potential of magnesium alloys on reducing structural weight and therefore contributing with energy efficiency of transportation facilities has mainly attracted the automotive and aeronautic industries. The ...
Avaliação de sistemas compatibilizantes nas correlações entre processamento e propriedades térmicas, mecânicas e de transporte em nanocompósitos de blenda HDPE/LLDPE e OMMT
(Universidade Federal de São Carlos, 2012-04-11)
Polyolefin nanocomposites have attracted significant technological and scientific interest due to the possibilities of improvements in thermal, mechanical and barrier properties. However, the hydrophobic nature of polyolefins ...
Reciclagem de cavacos de ligas de alumínio 7050-T7451 utilizando conformação por spray e tratamentos termomecânicos
(Universidade Federal de São Carlos, 2012-08-09)
The aim of this work is to conjugate a sort of known processing techniques in to a machining chips recycling route. These are generate during airframe primary parts from AA 7050-T7451, purchased according to AMS 4050H. The ...
Influência de polipropileno maleado no comportamento de fratura (EWF) de compósitos de polipropileno/fibra de vidro
(Universidade Federal de São Carlos, 2012-04-11)
Thermoplastic composites reinforced with short glass fibers, to be used in technical engineering applications, usually requires a good balance of properties, such as strength and tenacity. For the case of the composite of ...
Estudo das propriedades e desempenho mecânico de juntas soldadas por fricção pontual de poli (metacrilato de metila) (PMMA)
(Universidade Federal de São Carlos, 2012-10-05)
Polymeric components have been replacing traditional materials such as glass or metals in a wide range of applications due to their advantages, such as optimized specific strength (weight-to-strength ratio), reduced ...
Efeitos da incorporação de resíduos de espuma rígida de poliuretano em compostos poliméricos a base de polipropileno
(Universidade Federal de São Carlos, 2012-12-07)
This research fits in the technological development area and is aimed to evaluate the effects of adding waste of rigid polyurethane foam in the polymeric compounds based on polypropylene. The results of this research will ...