Search
Now showing items 1-10 of 11
Desenvolvimento de blendas poliméricas PVC/NBR através de processamento reativo e vulcanização dinâmica in situ
(Universidade Federal de São Carlos, 2008-02-28)
Dynamic vulcanization is a process of vulcanization of an elastomer during melt mixing with a thermoplastic which results in a material with better chemical and mechanical properties at high temperature. The PVC/NBR blends ...
Determinação das propriedades mecânicas da liga A356 conformada por spray para diferentes teores de ferro e condições de processamento
(Universidade Federal de São Carlos, 2008-04-22)
The aims of this work were the microstructural and tensile properties characterization of the hypoeutectic spray formed Al-Si 356, with and without contamination for iron, spray formed, extruded and heat treatment. The ...
Desenvolvimento e caracterização de blendas PHBV/Ecoflex® e suas modificações com amidos
(Universidade Federal de São Carlos, 2008-05-30)
Plastics materials produced from petrochemicals are widely used due to
their versatility, mechanical properties and low cost, but they cause environmental
impact as a consequence of the accumulation of great amount of ...
Influência da incorporação de aditivos nas propriedades do Poli (Hidroxibutirato-co-hidroxivalerato) - PHBV
(Universidade Federal de São Carlos, 2008-08-05)
The concept of environmentally correct products has been exhaustively discussed and, today, the use of biodegradable polymers appears as a feasible alternative for the problem of inadequate disposal of plastic waste products. ...
Monitoramento in-line da formação de nanocompósitos PP/MMT via intercalação no estado fundido
(Universidade Federal de São Carlos, 2008-08-04)
The aim of this work is to monitor in-line, using an optical detector fitted at the extruder die exit, the formation of PP/MMT nanocomposites during polymer melt compounding. The intensity of the detector´s signal is ...
Concretos refratários aluminosos espinelizados
(Universidade Federal de São Carlos, 2008-04-10)
The increasing steelmaking production level in association with the steel quality requirements led to the use of high performance materials. In this context, the use of refractory castables increased, due to their production ...
Estudo das propriedades reológicas de nanocompósitos para a produção de filmes tubulares
(Universidade Federal de São Carlos, 2008-07-08)
In this work, the use of rheological measurements in substitution or complementation to methods normally employed in the characterization of nanocomposites, such as X-ray diffraction (WAXS) and transmission electron ...
Conformação viscoplástica por rolos a frio e caracterização de substratos de alumina
(Universidade Federal de São Carlos, 2008-03-20)
Alumina ceramic substrates were conformed by viscoplastic conformation by cold roll pressing in a range of thickness between 100 and 200 µm, which one presents a great technology interesting for eletro-eletronic applications. ...
Desenvolvimento e caracterização de filmes tubulares de nanocompósitos de PEAD/EVA/argila organofílica
(Universidade Federal de São Carlos, 2008-03-10)
In this work, the use of ethylene-vinyl acetate copolymer (EVA) in substitution to compatibility agents normally employed in the production of high density polyethylene (HDPE) nanocomposites (such as polyethylene grafted ...
Processamento, caracterização microestrutural e avaliação das propriedades mecanicas da liga Al92Fe3Cr2Mn3
(Universidade Federal de São Carlos, 2008-09-08)
Aluminum alloys having a particle dispersion in nanometric scale, which present elevated values of mechanical strength at both ambient and high temperatures have been studied for some time. These alloys are known for ...