Search
Now showing items 11-20 of 31
Transformadores elétricos com núcleo de liga amorfa para aplicação em aeronaves
(Universidade Federal de São Carlos, 2015-04-28)
In order to reduce the mass of eletrical transformers and generators in aircrafts, many manufacturers have adopted 400 Hz as the operation of these devices. However this frequency causes increased core losses which were ...
Desenvolvimento de um colorímetro in-line para o monitoramento da extrusão de polímeros
(Universidade Federal de São Carlos, 2014-01-30)
This work shows the development, construction, validation and application of an in-line colorimeter used for real time color quantification of the melted flow during polymer processing in the extruder. The device uses a ...
Desvulcanização termomecânica contínua de borracha natural da banda de rodagem de pneus automotivos por meio do processo de extrusão em rosca dupla
(Universidade Federal de São Carlos, 2015-09-10)
The Natural rubber is a renewable source material widely used in the manufacture of automotive tire tread. The vulcanization results in a high thermodynamic stability and wide working range materials. However, after the ...
Estudo das propriedades mecânicas, térmicas e de transporte do compósito com carbonato de cálcio nano e microparticulado em polipropileno
(Universidade Federal de São Carlos, 2011-03-04)
In this work were determined and compared to mechanical, thermal and barrier of the polypropylene composites containing micropartilate and microparticulate calcium carbonate. To prepare the composites, the filler was ...
Avaliação da tendência à formação de fase vítrea nas ligas à base de alumínio do sistema Al-Y-Fe
(Universidade Federal de São Carlos, 2009-08-03)
The present work aimed to study the glass-forming ability of the aluminum-itrium-iron (Al-Y-Fe) alloys. The work included the preparation of samples through the melt-spinning technique and varying the composition of the ...
Análise da influência das condições de processamento na morfologia e nas propriedades de blendas poliméricas PBT/ABS moldadas por injeção
(Universidade Federal de São Carlos, 2011-06-29)
A study on the correlation of blend morphology, properties, the injection molding process and manufacturing methods of polymeric blends constituted of PBT and ABS was proposed. Thus, uncompatibilized PBT/ABS blends have ...
Processamento e caracterização de mantas de nanofibras eletrofiadas e orientadas de Poli(fluoreto de vinilideno)
(Universidade Federal de São Carlos, 2009-11-10)
In this work was developed a collector to process aligned uniaxially nanofibers mats and with low dimensions suitable for applications such as sensor or transducer. Such nanofibers mats may have applications where control ...
Modificação por nitretação a plasma das superfícies dos aços AISI-4140, AISI-420C e DIN16MnCr5
(Universidade Federal de São Carlos, 2011-05-26)
Plasma nitriding is a surface modification technique used for improving hardness, wear resistance, and fatigue. In this work, samples of AISI-4140, DIN16MnCr, and AISI-420C steels were heat treated, forming martensitic ...
Avaliação da resistência à corrosão e das propriedades mecânicas da junta soldada de aço inoxidável duplex
(Universidade Federal de São Carlos, 2015-12-16)
The corrosion resistance and mechanical properties of hardness and toughness of a welded joint multipass duplex stainless steel have been evaluated under the condition with post-weld heat treatment and as-welded. The ...
Agentes mineralizadores e seus efeitos nas características morfológicas e físico-químicas de aluminas calcinadas
(Universidade Federal de São Carlos, 2015-08-31)
Calcination is an important step in the alumina production process, affecting the final properties of the resulting powder and the attained product. Over the previous decades, attempts have been conducted to understand ...