Search
Now showing items 21-30 of 30
Desenvolvimento de blendas de TPS, PCL E PLA e seus nanocompósitos com nanowhiskers de celulose de gravatá
(Universidade Federal de São Carlos, 2015-12-15)
The objective of this project was the study of polymer blends of thermoplastic starch (TPS), poly(ε-caprolactone) (PCL) and poly(lactic acid) (PLA) and the extraction of celulose nanowhisker from gravatá (Bromelia balansae) ...
Utilização da borracha natural no desenvolvimento de elastômeros termoplásticos
(Universidade Federal de São Carlos, 2010-05-28)
Dynamic vulcanization is a process of vulcanization of an elastomer during melt mixing with a thermoplastic. This process results in an elastomeric alloy material with the properties of a conventional thermoset rubber, but ...
Análise da influência das condições de processamento na morfologia e nas propriedades de blendas poliméricas PBT/ABS moldadas por injeção
(Universidade Federal de São Carlos, 2011-06-29)
A study on the correlation of blend morphology, properties, the injection molding process and manufacturing methods of polymeric blends constituted of PBT and ABS was proposed. Thus, uncompatibilized PBT/ABS blends have ...
Estudo da dispersão, localização seletiva e efeito compatibilizante de argila montmorilonita em blendas poliméricas de policarbonato/SAN
(Universidade Federal de São Carlos, 2015-03-30)
The present study investigated the compatibilization effect and stabilization on the morphology of polycarbonate/styrene-acrylonitrile blends (PC / SAN) by incorporating montmorillonite clay. A systematic study was realized ...
Caracterização de poli(hexametileno biguanida) e suas blendas com poli(álcool vinílico)
(Universidade Federal de São Carlos, 2012-07-31)
In this study, the physical-chemical characterization of poly(hexamethylene biguanide) hydrochloride, PHMB, was performed. It is a low molecular weight synthetic polymer with a broad-spectrum biocidal activity, widely used ...
Influência dos parâmetros de Processamento e da composição na morfologia de resinas ABS.
(Universidade Federal de São Carlos, 2004-08-24)
The present work is about the influence of processing parameter and composition on the morphology of acrylonitrile-butadiene-styrene (ABS)resins. The ABS grades chosen are commercial products with high rubber content, i. ...
Dispersão seletiva de argila montmorilonita em blendas poliméricas de PA6/ABS
(Universidade Federal de São Carlos, 2009-08-25)
For some applications toughening of polyamide is important. This can be accomplished through the addition of an elastomeric phase to the polyamide matrix with the drawback of a reduction in the stiffness and strength of ...
Estudo e desenvolvimento de blendas ternárias biodegradáveis a partir de poli(ácido lático), poli(álcool vinílico) e quitosana
(Universidade Federal de São Carlos, 2010-04-08)
The present study examined the use of poly(vinyl alcohol) as a compatibilizing agent between chitosan and PLA and as a diluent for chitosan in an approach where a dispersion chitosan in PVA produced by solution blending ...
Análise da processabilidade de blendas PBT/ABS compatibilizadas in situ com copolímeros acrílicos
(Universidade Federal de São Carlos, 2007-12-14)
Poly(butylene terephthalate)/acrylonitrile-butadiene-styrene (PBT/ABS) blends show high toughness at room temperature, low ductile-brittle transition temperature and stable morphology when compatibilized. The flowability ...
Deformação da fase dispersa e degradação de blendas poliméricas em extrusora dupla-rosca aberta e fechada
(Universidade Federal de São Carlos, 2011-09-05)
In order to obtain flexibility of the processing in a twin-screw extruder and operate it as an internal mixer, the second phase dispersion and deformation and degradation were analyzed during processing in an open and ...