Buscar
Itens para a visualização no momento 31-36 of 36
Cristalização e sinterização de bio vidros do sistema Na2O-CaO-SiO2-P2O5
(Universidade Federal de São Carlos, 2001-03-30)
The objective of this work was to study crystallisation and sintering of Bio-glasses of Na2O CaO SiO2 P2O5 aiming at the improvement of the mechanical properties. In order to study the development of glass-ceramics in this ...
Degradação da resistência à corrosão de aços inoxidáveis duplex, devido ao envelhecimento em baixas temperaturas por tempos prolongados.
(Universidade Federal de São Carlos, 2004-08-30)
Although duplex stainless steels exhibit good performance in many severe corrosive environments, their corrosion resistance can be hampered by precipitation of chromium (Cr) rich phases during aging heat treatments.
Micr ...
Estudo da transição de fase sólido-vapor e da eficiência de inibidores voláteis de corrosão quando incorporados em matrizes poliméricas
(Universidade Federal de São Carlos, 2005-08-05)
In this work it is proposed a potential barrier model between solid and vapor phases. As a consequence of this model it is developed a method to measure vapor pressure as low as 10-5 Pa. A thermodynamic system consisting ...
Análise da processabilidade de blendas PBT/ABS compatibilizadas in situ com copolímeros acrílicos
(Universidade Federal de São Carlos, 2007-12-14)
Poly(butylene terephthalate)/acrylonitrile-butadiene-styrene (PBT/ABS) blends show high toughness at room temperature, low ductile-brittle transition temperature and stable morphology when compatibilized. The flowability ...
Uso do método do trabalho essencial de fratura (EWF) para avaliar a tenacidade de blendas poliméricas.
(Universidade Federal de São Carlos, 2005-03-11)
Initially it was made a well elaborated study on the essential work
of fracture method (EWF) using the polyamide 6 (PA6) because this polymer
shows high difficult to evaluate its toughness. The PA6 is a semi-crystalline
polymer, ...
Seleção de ligas com alta tendência de formação de estrutura amorfa
(Universidade Federal de São Carlos, 2007-03-08)
The understanding of the law that explain why certain alloys form amorphous
structure by cooling the molten melt under cooling rates lower than others alloys
remains as one of the great challenges of the materials science ...