Search
Now showing items 581-590 of 698
Influência da tensão residual no empenamento de peças aeronáuticas usinadas a partir de placas laminadas de ligas de aluminio da serie 7XXX
(Universidade Federal de São Carlos, 2002-02-19)
The fast growing of regional jets market has required from airframe manufacturers a prompt attending to market demands and the primary parts fabrication at a planned quality, quantity, and time at low costs. In order to ...
Degradação da resistência à corrosão de aços inoxidáveis duplex, devido ao envelhecimento em baixas temperaturas por tempos prolongados.
(Universidade Federal de São Carlos, 2004-08-30)
Although duplex stainless steels exhibit good performance in many severe corrosive environments, their corrosion resistance can be hampered by precipitation of chromium (Cr) rich phases during aging heat treatments.
Micr ...
Caracterização da resistência à corrosão de ligas inoxidáveis Fe-Mn-Si-Cr-Ni-(Co) com efeito de memória de forma
(Universidade Federal de São Carlos, 2011-03-03)
In this work, the corrosion behavior of three Fe-Mn-Si-Cr-Ni (Co) shape memory stainless steels (SMSS) in aggressive environments was characterized. The electrochemical corrosion behavior in 0.5 M H2SO4 solution was obtained ...
Propriedades mecânicas de tração e impacto dos aços inoxidáveis CA15 e CA6NM
(Universidade Federal de São Carlos, 2007-02-27)
The subject of this work was to study the mechanical properties, based in tensile and impact tests, of two stainless martensitic steels cast under designations of ASTM Standards, namely the CA15 steel, a steel with 12% of ...
Estudo da dispersão de pigmentos orgânicos em resina de polipropileno para aplicação em fibras e filamentos
(Universidade Federal de São Carlos, 2009-08-03)
Polypropylene has become widely used in fiber and filament applications; most part of these applications use colorful pigments to satisfy aesthetic necessities, communication, identification and others. To achieve the ...
Modificação e caracterização da superfície do aço inoxidável Martensítico AISI 410
(Universidade Federal de São Carlos, 2010-04-29)
This work deals about the surface modification of the AISI 410 martensitic stainless steel. The modification of steel surfaces is important for the improvement of its mechanical and tribological properties. Among the ...
Processamento, caracterização e determinação do perfil de polarização do Poli(fluoreto de vinilideno)
(Universidade Federal de São Carlos, 2009-03-25)
This work characterized the ferroelectric polarization of the β-PVDF differentiating the individual contributions of the orientation and the crystalline phases in the remanent polarization of the PVDF. Those contributions ...
Avaliação do comportamento eletroquímico de juntas soldadas de aço inoxidável supermartensítico por feixe de elétrons baixo vácuo
(Universidade Federal de São Carlos, 2007-02-28)
The electrochemical evaluation of low vacuum electron beam weldments of supermartensitic stainless steel was carried out in terms of anodic polarization in potentiodynamic regime, intergranular corrosion by double loop ...
Influência dos parâmetros de Processamento e da composição na morfologia de resinas ABS.
(Universidade Federal de São Carlos, 2004-08-24)
The present work is about the influence of processing parameter and composition on the morphology of acrylonitrile-butadiene-styrene (ABS)resins. The ABS grades chosen are commercial products with high rubber content, i. ...
Avaliação do dano por choque térmico em concretos refratários via espectroscopia acústica ressonante não-linear
(Universidade Federal de São Carlos, 2012-03-02)
In this thesis the Non-linear Resonant Acoustic Spectroscopy Technique used to evaluate the mesoscopic non-linearity was incorporated into the Impulse Excitation Technique, which is extensively applied to the evaluation ...