Search
Now showing items 621-630 of 699
Design de ligas multicomponentes do sistema Ti-V-Nb-M (M = Cr, Co E Ni) para armazenagem de hidrogênio
(Universidade Federal de São Carlos, 2023-05-15)
Body Centered Cubic (BCC) multicomponent alloys have gained attention in the research of materials for H2 storage. These alloys have the potential to optimize H2 storage properties via compositional control. However, the ...
Parâmetros de monitoramento na produção industrial de componentes em zircônia parcialmente estabilizada com óxido de magnésio
(Universidade Federal de São Carlos, 2012-02-08)
Zirconia has been widely applied on production of structural components, mainly due to its great mechanical properties. However, these properties are associated to the zirconia tetragonal and cubic phases, which are stable ...
Avaliação da resistência mecânica de argamassas de cimento Portland contendo serragem de couro tratada em meio ácido
(Universidade Federal de São Carlos, 2006-07-31)
Suitable destination of industrial solid wastes that have not well
established or completely successful mitigation techniques is nowadays a
fundamental important subject, all over the world. In Brazil, one of the ...
Aluminato de lantânio puro e dopado: obtenção e caracterização elétrica
(Universidade Federal de São Carlos, 2009-02-20)
In the attempt to find new electrolyte materials for Solid Oxide Fuel Cells (SOFC) that works at low temperature, perovskite-type materials have been intensively investigated. These materials have favorable crystal structure ...
Caracterização do nanocompósito de Al2O3 com inclusões nanométricas de ZrO2 visando sua aplicação como reforço em próteses odontológicas de cerâmica livre de metal
(Universidade Federal de São Carlos, 2008-02-22)
There are many different materials used in dental prosthesis, metal combined with ceramic (metalloceramic), combination of polymers with metal (metal-polymer), metal, polymer and ceramic metal free or metal-free. Metalfree ...
Estudo da influência da adição de serragem de couro tratada quimicamente nas características de argamassas de cimento Portland
(Universidade Federal de São Carlos, 2009-05-15)
The purpose of this study was to examine the major environmental concern for the large volume of toxic wastes generated by industries of tanneries and the search for a technological solution for the treatment of this waste. ...
Deformação da fase dispersa e degradação de blendas poliméricas em extrusora dupla-rosca aberta e fechada
(Universidade Federal de São Carlos, 2011-09-05)
In order to obtain flexibility of the processing in a twin-screw extruder and operate it as an internal mixer, the second phase dispersion and deformation and degradation were analyzed during processing in an open and ...
Seleção de ligas com alta tendência de formação de estrutura amorfa
(Universidade Federal de São Carlos, 2007-03-08)
The understanding of the law that explain why certain alloys form amorphous
structure by cooling the molten melt under cooling rates lower than others alloys
remains as one of the great challenges of the materials science ...
Processamento e caracterização da liga Al93Fe3Cr2Ti2 solidificada rapidamente
(Universidade Federal de São Carlos, 2005-03-07)
The necessity to use materials presenting low density, high tensile strength and easy processing ability have led to the development of news materials and news processing techniques. More recently we can find in the ...
Pesquisa em consolidação do fechamento de vazios internos em produtos forjados no aço W.Nr. 1.2738 modificado
(Universidade Federal de São Carlos, 2018-11-23)
During steel ingot solidification, internal voids are expected to be formed in its interior. Such voids, if they stay in the final product after the forging step, will hurt the performance and properties of the final ...