Search
Now showing items 1-10 of 52
Estudo do processo de soldagem a ponto por fricção de juntas dissimilares entre ligas de alumínio e titânio
(Universidade Federal de São Carlos, 2016-12-09)
Multimaterial structures between aluminum and titanium alloys are a
technologically attractive field of research and their increasing use in the
transportation sector for weight and emission reduction is part of the ...
Comportamento mecânico em fadiga da liga de titânio beta metaestável Ti-5553
(Universidade Federal de São Carlos, 2016-10-14)
The microstructure of metastable beta Ti alloys is a decisive factor that
governs their properties and, therefore, the assessment of the relation between
the microstructure and the fatigue response means an advance in ...
Trincamento induzido por hidrogênio em aços inoxidáveis supermartensíticos modificados pela ação de boro para aplicação em exploração de petróleo em águas profundas
(Universidade Federal de São Carlos, 2015-09-21)
The oil exploitation and production in deep water involves drilling risers with over 7 km deep. In this condition, the environments found in such wells are too adverse, acting under the exploration and production equipment, ...
Estudo das propriedades mecânicas do aço ao boro 50B35 com diferentes tamanhos de grãos
(Universidade Federal de São Carlos, 2015-07-22)
Boron steel has excellent hardenability due to the addition of small quantities of
boron. Boron atoms reduces the nucleation rate of ferrite and bainite [1]. It is
known that austenitizing temperature and time and cooling ...
Evolução microestrutural e propriedades mecânicas decorrentes da solidificação das ligas Al-11%Si-xCu
(Universidade Federal de São Carlos, 2018-11-21)
Al-Si-Cu ternary alloys are highly used and recommended to produce joints of aluminum alloys using brazing process. Dissimilar joints between these alloys and stainless steels, carbon steels and low alloy steels can also ...
Correlação entre morfologia, percolação elétrica e propriedades mecânicas de compósitos da blenda PLA/PBS com grafite expandido
(Universidade Federal de São Carlos, 2013-12-06)
In recent years, researchers from industry and universities have focused
their interests in polymer nanocomposites, especially in multifunctional
composites. The composites made from nano expanded graphite ( nGE ) ...
Correlações entre propriedades dinâmico-mecânicas e durabilidade sob fadiga mecânica em compósitos de polipropileno/polipropileno maleificado/fibra de vidro
(Universidade Federal de São Carlos, 2006-09-06)
Although the influence of interfacial adhesion on short-term mechanical
performance of fiber-reinforced thermoplastic composites has been well
established, very little published information is available on the influence ...
Mechanical properties and metallurgical characterization of AA6082-T6 alloy welded by refill friction stir spot welding
(Universidade Federal de São Carlos, 2019-07-30)
The efforts to produce automobiles with intense use of aluminum alloys is growing and the 6XXX series of aluminum alloys are important for this scenario. However, the current joining technologies applied in these alloys ...
Deformação em canal angular de uma liga Al-4%Cu: efeito dos mecanismos de endurecimento na resistência mecânica e ductilidade
(Universidade Federal de São Carlos, 2011-03-03)
Internal boundaries hardening and precipitation hardening are two important mechanisms acting in metallic alloys. The former has special relevance when the grain size is reduced ...
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...