Search
Now showing items 1-10 of 24
Caracterização microestrutural, eletroquímica e tribológica de revestimentos HVAF Fe₆₈Cr₈Mo₄Nb₄B₁₆
(Universidade Federal de São Carlos, 2023-02-28)
High corrosion and wear resistance are basic requirements for materials that operate in aggressive environments such as those found in the petrochemical, mining and agro-industry industries. Fe-Cr-B-based vitreous/nanocrystalline ...
Aplicação de redes neurais para classificação de microinclusões de sulfeto de manganês em aços
(Universidade Federal de São Carlos, 2023-02-24)
The factors that measure the influence of inclusions on steel properties are the distribution, morphology and size of inclusions. The standard used as a reference is ASTM E45, which explains the sample scanning method in ...
Efeito do teor de titânio no endurecimento por precipitação em uma liga à base de Co-Ni e consequências nas propriedades mecânicas
(Universidade Federal de São Carlos, 2021-04-19)
The alloy subject of this study, designated by the Unified Numbering System,
R30035 and internationally known as MP35N®, is a 35 Ni – 33.5 Co – 20.5 Cr – 9.5
Mo alloy with very-high mechanical strength, ductility, and ...
Caracterização de interfaces para aplicações em ultra-alto vácuo através de brasagem dissimilar entre nitreto de boro hexagonal (h-BN), a liga de adição Ag-Cu-Ti e o Mo metálico
(Universidade Federal de São Carlos, 2020-08-14)
This work aimed to evaluate the vacuum brazing of h-BN/Mo systems for fabrication of the BPM (Beam Position Monitor) in synchrotron radiation beam. The h-BN has low surface wettability and is difficult to weld. The materials ...
Soldagem por ponto por fricção das ligas de alumínio 5A06-O/2219-T87: caracterização mecânica e microestrutural
(Universidade Federal de São Carlos, 2022-11-30)
Refill Friction Stir Spot Welding (RFSSW) is a solid-state joining technique for welding dissimilar and similar materials applied to light alloys and thermoplastics. Thus, the purpose of this work was to evaluate the ...
Produção, caracterização e propriedades de superfície de filmes finos de Ti-Nb-Zr
(Universidade Federal de São Carlos, 2023-04-25)
With the increasing use of implants, due to the possibility of replacing certain
parts of the human body as a means to improve health, there is a growing body
of research on biocompatible metallic alloys. One widely used ...
Bibliometria e análise de conteúdo sobre o ensino por competências na educação em engenharia de materiais
(Universidade Federal de São Carlos, 2022-04-08)
Engineering education is a field of great importance, due to its ability to graduate strategic professionals to support the socioeconomic growth of the countries. Materials Engineering, for instance, emerged in Brazil with ...
Efeito do inoculante Al-Nb-B na microestrutura e propriedades mecânicas da liga AA2017 fabricada por fusão em leito de pó a laser
(Universidade Federal de São Carlos, 2023-01-24)
The blending of finer powders of Ti, Zr, Ta, Sc, and Nb compounds as inoculants has been a promising strategy to modify precipitation-hardened aluminum alloys for laser-based powder bed fusion process (L-PBF), promoting a ...
Detector óptico NIR in-line para monitoramento da degradação termomecânica do polipropileno durante a extrusão
(Universidade Federal de São Carlos, 2022-05-02)
The present research aimed to develop an in-line NIR (near infrared) optical detector to monitor polypropylene (PP) thermomechanical degradation during extrusion. The optical detector monitors, in real time, the absorbance ...
Estudo de Ligas Fe-Nb-B Nanocristalinas Eutéticas Ultrafinas e Laser Cladding de Pós Atomizados
(Universidade Federal de São Carlos, 2020-05-20)
Fe-Nb-B alloys have gained much attention in recent years because of the possibility to obtain different constituents in nanostructured composites, amorphous and ultrafine eutectics (scale of 100 nm to 1 μm) alloys depending ...