Search
Now showing items 1-10 of 39
Processo de laminação com resfriamento criogênico em ligas de magnésio para armazenagem de hidrogênio
(Universidade Federal de São Carlos, 2017-08-25)
The use of metallic hydrides is a competitive alternative to the hydrogen storage in the liquid or gas states. The magnesium is cheap and forms the metal hydride with higher gravimetric capacity. In this work, the commercial ...
Estudo da resistência à corrosão de ligas de alumínio com grãos ultrafinos obtidos por deformação plástica severa através do processo ECAP
(Universidade Federal de São Carlos, 2017-10-02)
The present work evaluated the effect of severe plastic deformation and ultrafine grains, obtained through the ECAP (equal-channel angular pressing) process, in the corrosion resistance of AA1050 aluminum alloy. The ...
Solidificação, microestrutura e propriedades mecânicas da liga de alumínio 6061 com 1,4%p Fe processada por conformação por spray e extrusão a quente
(Universidade Federal de São Carlos, 2017-11-24)
The 6xxx series aluminum alloys are wrought alloys which belongs to the MgSi class and can be heat treated, have a good workability and a good mechanical resistance / weight ratio. A great challenge is to avoid impurity ...
Preparação, caracterização e otimização de biocompósitos poliméricos comestíveis reforçados com fibras vegetais
(Universidade Federal de São Carlos, 2017-05-19)
The ever-growing environmental concern arising from the unrestricted exploitation of fossil raw materials for the massive production of non-biodegradable materials, guided by the rapid increase in the world population as ...
Microestrutura e propriedades mecânicas da liga AA6061 processada por deformação plástica severa em temperatura criogênica
(Universidade Federal de São Carlos, 2017-08-08)
The present work aimed two fronts: to characterize the mechanical behavior of the AA6061 alloy at cryogenic temperature, and to study the microstructural and properties evolution after cryogenic severe plastic deformation. ...
Correlações entre microestrutura, parâmetros térmicos e propriedades mecânicas de ligas de alumínio da série 5xxx solidificadas unidirecionalmente
(Universidade Federal de São Carlos, 2017-08-04)
Processing high-Mg content Aluminum Alloys by continuous casting technics is considered an industry challenge. The present research aims to characterize 5xxx alloy series, considering composition based on the commercial ...
Evaluation of TI-6AL-4V friction surfacing coatings reinforced with carbides
(Universidade Federal de São Carlos, 2017-12-14)
Friction surfacing is a thermo-mechanical process employed to deposit coatings in solid state resorting to friction between a rotating consumable rod and a substrate. The current work focuses on deposition of Ti-6Al-4V ...
Avaliação da resistência à corrosão localizada do alumínio em juntas dissimilares al-ti soldadas por fricção por ponto (FSpW)
(Universidade Federal de São Carlos, 2017-03-27)
The work evaluated the effect of the FSpW welding process on the aluminum surface in two overlapping welded joints, AA6181-T4/Ti-6Al-4V and AA5754-H22/Ti-6Al-4V. The microstructural changes were evaluated through optical ...
Caracterização dos materiais lignocelulósicos da castanha do Brasil (Bertholletia excelsa), preparação e caracterização de seus compósitos com polipropileno
(Universidade Federal de São Carlos, 2017-05-31)
This research aimed to characterize the lignocellulosic materials of the
Brazil nut (Bertholletia excelsa) extraction process and to develop biocomposites
incorporating these materials with homopolymer and copolymer ...
Regeneração de rejeito espuma de SBR através de extrusão no estado sólido e incorporação em SBR virgem
(Universidade Federal de São Carlos, 2017-09-29)
The objective of the present work is the study of the recycling of vulcanized rubber foam waste from the footwear industry through the solid state extrusion process known as Solid State Shear Extrusion (SSSE). The industrial ...