Search
Now showing items 1-10 of 46
Efeito da microadição de oxigênio na estabilidade microestrutural da liga Ti-29Nb-13Ta-4,6Zr processada via deformação plástica severa e envelhecimento
(Universidade Federal de São Carlos, 2021-02-24)
Gum Metal corresponds to a family of β-Ti alloys that are currently receiving great attention due to its outstanding properties such as low elastic modulus, superelasticity, and high tensile strength. These alloys show ...
Avaliação dos modelos numéricos para a simulação da secagem de concretos refratários
(Universidade Federal de São Carlos, 2021-02-25)
The drying of hydraulic bonded monolithic refractories is the slowest stage of their application process. Problems related to the control of such a procedure result in cracks, spalling and even, in extreme cases, explosions ...
Avaliação da integridade superficial de insertos retificados da liga WC-Co para ferramentas de corte
(Universidade Federal de São Carlos, 2021-05-11)
Cutting tools produced from cobalt tungsten carbide alloy (WC-Co),
compared to conventional cutting tools, provide lower cost of machining, with
increasing productivity and acceptable combination of hardness and ...
Efeito da adição de Al e C na evolução microestrutural e no comportamento mecânico de aços austeníticos de baixa densidade com alto teor de Mn
(Universidade Federal de São Carlos, 2021-05-20)
Low-density steels are advanced materials that are being developed mainly for the automotive industry to reduce the structural weight of cars. The most common studied compositions comprise FeMnAlC variations, in which both ...
Evolução microestrutural e propriedades mecânicas das ligas Al-10%Si-0,45%Mg e Al-10%Si-1,0%Mg
(Universidade Federal de São Carlos, 2021-07-28)
Al-Si alloys with high silicon (Si) content are widely used in aerospace, automotive, microelectronics, among others. In this context, the Al-10 wt.% Si alloys with the addition of Magnesium (Mg) are alternatives that ...
Development of ionic conductive cellulose mat by solution blow spinning and laser-induced graphene from pineapple nanocellulose for use in flexible electronic devices
(Universidade Federal de São Carlos, 2021-02-26)
In the face of environmental issues and aiming at electronic devices of
rapid production at low cost, this doctoral thesis proposed two new and
innovative approaches to obtain substrates, dielectrics, and electrodes from ...
Nucleação e crescimento de cristais, difusão e relaxação estrutural em vidros 2Na2O.CaO.3SiO2 e 5BaO.8SiO2
(Universidade Federal de São Carlos, 2021-06-25)
Despite intensive research regarding glass crystallization, there are still flaws in the theories and especially in their application. Aiming to verify the applicability of the classical nucleation theory (CNT) and the ...
Weldability of AA5083-O/H111 and naval GL D36 steel lap joints by friction stir welding
(Universidade Federal de São Carlos, 2021-01-25)
Steel structures welded with aluminum alloys, which combine the low cost and high mechanical strength of steel with the weight reduction and the excellent specific properties of the aluminum alloys, are in great demand. ...
Desenvolvimento de ligas de alumínio recicladas contendo a fase primária Al(Fe,TM)Si aproximante de quasicristal: controle da microestrutura visando aplicações tribológicas e mecânicas
(Universidade Federal de São Carlos, 2021-01-19)
Iron is the most common and harmful impurity to the mechanical properties of casting Al-7Si-3Cu alloys, which are widely used in the automotive industry. Due to the economic and environmental advantages of recycling, there ...
Equilíbrio de fases e propriedades mecânicas da liga de elemento multiprincipal Cr40Co40Ni20
(Universidade Federal de São Carlos, 2021-02-19)
In the pursuit for materials with improved performance, multi-principal element alloys (MPEAs) attract the interest of the scientific community, due to their large composition space. Some Cr-Co-Ni alloys stand out with ...