Search
Now showing items 1-10 of 39
Solidificação, microestrutura e propriedades mecânicas da liga de alumínio 6061 com 1,4%p Fe processada por conformação por spray e extrusão a quente
(Universidade Federal de São Carlos, 2017-11-24)
The 6xxx series aluminum alloys are wrought alloys which belongs to the MgSi class and can be heat treated, have a good workability and a good mechanical resistance / weight ratio. A great challenge is to avoid impurity ...
Otimização das propriedades mecânicas da liga de alumínio 319 contaminada com ferro
(Universidade Federal de São Carlos, 2019-02-15)
The influence of iron additions (0.6, 0.8, 1.2 and 1.5 wt.%) and heat treatment on the microstructure and tensile properties of the 319-aluminum alloy processed by spray forming and rotary swaging was investigated. The ...
Estudo da viabilidade de formação de nitreto de boro em aços inoxidáveis ferríticos
(Universidade Federal de São Carlos, 2020-03-02)
Since the 90s, the petroleum industry has been conducting research on alloys that are wear and corrosion resistant once several equipment parts used in the oil exploitation, extraction and production, such as pipes, joints, ...
Efeito do revenimento sobre a resistência à corrosão do aço inoxidável uns s41426
(Universidade Federal de São Carlos, 2020-02-28)
Supermartensitic stainless steels were developed during the 1990s as an alternative to duplex stainless steels for manufacture of oil country tubular goods. As a result of microstructural variations caused during tempering ...
Mg-containing multicomponent alloys produced by high-energy ball milling for hydrogen storage
(Universidade Federal de São Carlos, 2020-02-20)
Hydrogen is a promising energy carrier that allows the use of energy in a sustainable form. However, safe and efficient hydrogen storage is a scientific and technological challenge that still has to be overcome. Recently ...
Manufatura aditiva da liga reciclada Al-Fe-Cr-Ti formadora de fase quasicristalina
(Universidade Federal de São Carlos, 2020-02-27)
The precipitation of quasicrystalline phase in an α-Al dendritic matrix provides Al-based alloys with high mechanical and wear resistance, mainly at high temperatures, which are promising for applications as automotive and ...
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...
Efeito da re-nitretação nas propriedades de matrizes de extrusão a quente de alumínio, confeccionadas em aços ferramenta vex e h13
(Universidade Federal de São Carlos, 2018-07-08)
Aluminum extrusion is a thermomechanical process widely used throughout the world, and the performance of this process is strongly dependent on the quality of the tool steel used in the manufacture of the dies. In this ...
Eletrodeposição de ligas bioabsorvíveis do sistema Fe-Mn
(Universidade Federal de São Carlos, 2019-03-25)
Stents are medical devices which promote the opening and mechanical support of clogged blood vessels and, once applied, cannot be removed. The manufacture of bioabsorbable stents is desirable to avoid several subsequent ...
Produção e caracterização de ligas do sistema Al-Co-Fe- Cr e aplicações como recobrimentos para barreiras térmicas
(Universidade Federal de São Carlos, 2015-07-23)
Since the discovery of the quasicrystalline alloys by D. Schechtamn in 1984,
many research has been done in terms of coating application of these materials
and their intermetallic approximants due to their physical and ...