Buscar
Mostrando ítems 11-20 de 38
Influence of Bobbin Tool Friction Stir Welding (BT-FSW) variants on the microstructure and properties of AA2060 and AA2196 aluminum alloys
(Universidade Federal de São Carlos, 2020-06-18)
In order to reduce total costs in aircrafts production, operation and maintenance, materials and processing techniques have been continuously further optimized. In this scenario, aluminum-lithium alloys have been studied ...
Influência da adição de cério na resistência à corrosão e efeito de memória de forma em ligas Fe-Mn-Si-Cr-Ni-(Ce)
(Universidade Federal de São Carlos, 2020-09-03)
The interest in scientific and technological development of Fe-Mn-Si-Cr-Ni shape memory alloys is increasing in the last years. The improvement of key properties of theses alloys should enable its use in different applications, ...
Análise de falha de martelos oscilantes de desfibradores utilizados em usinas sucroalcooleiras
(Universidade Federal de São Carlos, 2021-07-30)
Sugarcane mills have demanded more control of their production line,
reduced loss of raw material, and a longer period before maintenance of their
equipment, aiming to increase their profitability. The main station of ...
Síntese de Mg2NiH4 para armazenagem de hidrogênio em compósito polimérico
(Universidade Federal de São Carlos, 2021-03-01)
In this work, powder production routes based on Mg2NiH4 are investigated, utilizing high-energy reactive milling; thermal treatment procedures, and hydrogen absorption/desorption cycles, which promote controlled decrepitation, ...
Monitoramento in/on-line da malaxagem na extrusão: hidrólise e extensão de cadeia do poli(tereftalato de etileno) e fusão do polipropileno
(Universidade Federal de São Carlos, 2020-08-14)
During twin-screw extrusion, understanding and quantifying the behaviour of molten polymers under different conditions is limited by the complex configuration of the equipment. Due to this fact, real-time extrusion monitoring ...
Influência da incorporação de negro de fumo e carbonato de cálcio micro e nanoparticulado nas propriedades reológicas, colorimétricas e mecânicas de filmes de polietileno de baixa densidade
(Universidade Federal de São Carlos, 2021-06-30)
In this work, the influence of incorporation of Carbon Black (CB) and CaCO3, both with different particle sizes, on the rheological, colorimetric and mechanical properties of LDPE films were studied. Three different types ...
Recobrimentos de ligas Ti-Nb-Zr depositados por pulverização magneto-catódica sobre aço inoxidável AISI 316L para aplicações biomédicas
(Universidade Federal de São Carlos, 2022-11-30)
The work consists of the deposition of Ti-Nb-Zr ternary alloy coatings in the form of thin films on an AISI 316L stainless steel substrate for applications in the biomedical area, such as dental or orthopedic prosthesis. ...
Desenvolvimento, caracterização e desempenho de novos eletrodos para dispositivos eletromecânicos baseados em nanocompósitos elastoméricos condutores tratados por plasma
(Universidade Federal de São Carlos, 2022-06-28)
Ionomeric polymer-metal composites (IPMC) are devices generally composed of metallic electrodes and an ionomeric polymer membrane in a “sandwich-like” format, whose main property is the electromechanical actuation or sensing ...
Avaliação das microestruturas de solidificação e propriedades de aplicação de ligas monotéticas Al-Bi, Al-Bi-Cu e Al-Bi-Zn
(Universidade Federal de São Carlos, 2021-06-16)
Monotectic Al-based ternary alloys can result in a good combination of wear resistance and mechanical strength. While the soft self-lubricating elements contribute to an appropriate wear resistance, modification with third ...
Obtenção de fibras cerâmicas ultrafinas à base de Nb₂O₅ para a fotoconversão gasosa de dióxido de carbono
(Universidade Federal de São Carlos, 2021-05-21)
The increase in global warming rates is worrisome due to the harmful effects on different ecosystems. However, there is a need to reconcile these figures with the demand of industrial society for food, health, leisure, and ...