Search
Now showing items 31-40 of 444
Otimização das propriedades mecânicas da liga de alumínio 319 contaminada com ferro
(Universidade Federal de São Carlos, 2019-02-15)
The influence of iron additions (0.6, 0.8, 1.2 and 1.5 wt.%) and heat treatment on the microstructure and tensile properties of the 319-aluminum alloy processed by spray forming and rotary swaging was investigated. The ...
Indicadores de produção científica para prospecção tecnológica em manufatura aditiva de biocerâmicas
(Universidade Federal de São Carlos, 2019-05-31)
In the Bone Tissue Engineering, biomaterials are used as scaffolds to produce a support and cell growing. Because of the similarity to the bones cells, ceramic compounds are the main materials used to produce the scaffold. ...
Correlações entre propriedades dinâmico-mecânicas e durabilidade sob fadiga mecânica em compósitos de polipropileno/polipropileno maleificado/fibra de vidro
(Universidade Federal de São Carlos, 2006-09-06)
Although the influence of interfacial adhesion on short-term mechanical
performance of fiber-reinforced thermoplastic composites has been well
established, very little published information is available on the influence ...
Regeneração de rejeito espuma de SBR através de extrusão no estado sólido e incorporação em SBR virgem
(Universidade Federal de São Carlos, 2017-09-29)
The objective of the present work is the study of the recycling of vulcanized rubber foam waste from the footwear industry through the solid state extrusion process known as Solid State Shear Extrusion (SSSE). The industrial ...
Desenvolvimento de compósitos biodegradáveis a partir de amido termoplástico e fibras vegetais
(Universidade Federal de São Carlos, 2011-09-16)
This project had as main objectives to obtain and to develop new and biodegradable composites from renewable sources using a thermoplastic starch (TPS) matrix reinforced with different amounts of natural fibers, acuri, ...
Produção, caracterização estrutural e propriedades de armazenagem de hidrogênio de ligas Mg-Zr
(Universidade Federal de São Carlos, 2017-03-31)
Magnesium is considered a promising candidate in applications of storage hydrogen in the solid state, due, among other factors, to its low relative cost and high gravimetric capacity (7,6 wt%.). For magnesium, the use of ...
Tendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporário
(Universidade Federal de São Carlos, 2011-10-24)
Mg alloys have attracted attention as potential implant material because of their good mechanical properties, biocompatibility and biodegradation properties. However corrosion of these alloys causes intense release of ...
Simulação computacional, projeto, construção e análise do desempenho de uma matriz para extrusão em canal angular dedicada ao processamento de chapas
(Universidade Federal de São Carlos, 2012-08-29)
The present work describes the design, construction and testing of an equal channel angular pressing (ECAP) die characterized by rectangular cross section channels. The main parameter of the ECAP dies is the geometry of ...
Estudo do processo de soldagem por fricção por ponto da liga de magnésio AZ31
(Universidade Federal de São Carlos, 2012-08-17)
The great potential of magnesium alloys on reducing structural weight and therefore contributing with energy efficiency of transportation facilities has mainly attracted the automotive and aeronautic industries. The ...
Utilização da técnica de conformação por coagulação direta (direct coagulation casting) em massas refratárias de sílica para processos de fundição por cera perdida
(Universidade Federal de São Carlos, 2013-01-22)
Refractory masses for lost wax casting process of steel and alloys, especially for dental devices are constituted basically of silica (quartz and / or cristobalite). In these materials, the binding agent is generally based ...