Buscar
Mostrando ítems 61-70 de 158
Influência da adição de Nb-B na microestrutura de solidificação da liga Al-0,8%Mg-0,7%Si (6201)
(Universidade Federal de São Carlos, 2022-04-11)
The AA6201 alloy, widely used in the manufacturing of power cables, was modified by the addition of a Al-Nb-B master alloy in order to investigate the possible effects on the microstructure. Therefore, the Al-0.8%Mg-0.7%Si ...
Síntese de Mg2NiH4 para armazenagem de hidrogênio em compósito polimérico
(Universidade Federal de São Carlos, 2021-03-01)
In this work, powder production routes based on Mg2NiH4 are investigated, utilizing high-energy reactive milling; thermal treatment procedures, and hydrogen absorption/desorption cycles, which promote controlled decrepitation, ...
Estabilidade microestrutural da liga Cu-0,8Cr-0,07Zr após extrusão em canal angular em temperatura criogênica
(Universidade Federal de São Carlos, 2021-12-20)
Severe Plastic Deformation (SPD) are well established routes with regard to the
intense microstructural refining of metals and alloys up to the submicrometer (<
1 μm) and/or nanometer (< 100 nm) scales. Lowering the ...
Mapeamento de parâmetros de soldagem robotizada GMAW visando tempos de produção reduzidos para juntas do aço ASTM A572 G50
(Universidade Federal de São Carlos, 2022-09-15)
The welding process using electric arc with shielding gas (GMAW - Gas Metal Arc Welding) is extremely widespread and used in several applications. This is due to its high productivity combined with low cost in addition to ...
Estudo da influência de contraíons nas propriedades eletroquímicas, eletromecânicas e térmicas de compósito polímero ionomérico metal (IPMC) de Náfion®/Pt
(Universidade Federal de São Carlos, 2022-06-21)
In the field of soft actuators, ionomeric polymer metal composite like devices
(IPMCs) are a trend, as they display great displacement when a low electric
potential is applied. Its work mechanism is related to the migration ...
Monitoramento in/on-line da malaxagem na extrusão: hidrólise e extensão de cadeia do poli(tereftalato de etileno) e fusão do polipropileno
(Universidade Federal de São Carlos, 2020-08-14)
During twin-screw extrusion, understanding and quantifying the behaviour of molten polymers under different conditions is limited by the complex configuration of the equipment. Due to this fact, real-time extrusion monitoring ...
Influência da incorporação de negro de fumo e carbonato de cálcio micro e nanoparticulado nas propriedades reológicas, colorimétricas e mecânicas de filmes de polietileno de baixa densidade
(Universidade Federal de São Carlos, 2021-06-30)
In this work, the influence of incorporation of Carbon Black (CB) and CaCO3, both with different particle sizes, on the rheological, colorimetric and mechanical properties of LDPE films were studied. Three different types ...
Estudo de Ligas Fe-Nb-B Nanocristalinas Eutéticas Ultrafinas e Laser Cladding de Pós Atomizados
(Universidade Federal de São Carlos, 2020-05-20)
Fe-Nb-B alloys have gained much attention in recent years because of the possibility to obtain different constituents in nanostructured composites, amorphous and ultrafine eutectics (scale of 100 nm to 1 μm) alloys depending ...
Evolução de fases durante a hidratação do cimento portland brasileiro por difração de raios x
(Universidade Federal de São Carlos, 2021-03-03)
The physicochemical properties of cementitious materials are determined by the mineralogy and hydration process of the cement. In 2018, the ABNT NBR 16697 standard was published, unifying eight standards related to Portland ...
Design, síntese e caracterização de ligas multicomponentes contendo Mg para armazenagem de hidrogênio
(Universidade Federal de São Carlos, 2022-02-14)
The use of hydrogen as an alternative fuel has been investigated due to its great potential to be used as an energy vector. One of the challenges for its wide application is to store it safely and efficiently. Therefore, ...