Listar Teses e dissertações por título
Mostrando ítems 11-30 de 141
-
Binchotan charcoal as a renewable source for partial replacement of calcined petroleum coke in the aluminum industry
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, Câmpus Sorocaba, 11/06/2024)Fossil-based materials have been used in the aluminum industry for many decades but cause major environmental impacts. The use of biomaterials can help to reduce these impacts. The aluminum industry uses calcined petroleum ... -
(Bio)sensores eletroquímicos impressos em 3d e novos filamentos condutivos aplicados à química analítica
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, Câmpus Sorocaba, 23/02/2024)Electrochemical sensors can be employed for diverse detection purposes, and their modification with biological compounds enables the development of biosensors with selectivity for analytes such as viruses. Furthermore, the ... -
Blenda de Polihidróxibutirato(PHB)/Copoliéster Alifático Aromático (AAC) Ecoflex® reforçada com nanofibras de celulose (NFC): análise da resistência mecânica e propriedades químicas
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, Câmpus Sorocaba, 21/03/2016)Due to increasing use of polymeric materials in society and the large volume of of those materials disposal in nature, the biodegradable polymers have increased interest in research of materials area. The Polyhydroxybu ... -
Blendas de carvão vegetal e carvão mineral para a produção de briquetes
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, Câmpus Sorocaba, 25/05/2014)Brazil produces about 37 million cubic meters of charcoal per year whit an increasing due to the gradual coal replacement, once the coal mined in Brazil does not have adequate levels of carbon for some purposes, such as ... -
Blendas de polietileno e amido termoplástico modificado
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, , 06/04/2011)The development of materials derived from renewable or biodegradable resources has attracted attention from academic and industrial sectors due to the growing need for replacement of synthetic materials derived from renewable ... -
Borracha natural modificada com ácido hialurônico para aplicações em lesões cutâneas
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, Câmpus Sorocaba, 22/08/2022)Skin lesions are considered a public health problem, because in addition to compromising and impairing the quality of life of individuals, they can generate high costs for the health system. In this context, the search ... -
Caracterização da alumina anódica porosa modificada por plasma
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, Câmpus Sorocaba, 29/06/2015)In this study, the wettability of porous anodic alumina (PAA) surfaces modified by plasma was investigated. The porous anodic alumina films were grown on aluminum substrate using a two step anodization procedure in oxalic ... -
Caracterização de biominerais a partir das interações entre vivianita e acidithiobacillus ferrooxidans, sob diferentes substratos sedimentares, como potencial para bioassinaturas em condições marcianas pretérita
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, Câmpus Sorocaba, 27/09/2023)The concept of “life” has not yet been established, nor has its origin been clarified. This represents a challenge for the areas of science that strive to investigate the possibility of life in environments other than ... -
Caracterização de filmes de alginato de sódio e PEDOT:PSS para potencial aplicação em dispositivos eletrocrômicos
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, Câmpus Sorocaba, 25/03/2019)Polymer (3,4-ethylenedioxythiophene) in association with PSS Poly (4-styrenesulfonic acid) PEDOT: PSS, are a class of materials that associate properties found in plastics with electrical characteristics present in metals. ... -
Caracterização e confecção de briquetes de casca de liquri (Syagrus coronata (Mart) Becc.) para produção de energia
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, Câmpus Sorocaba, 06/04/2015)The Licuri bark is a potential source of biomass for energy production. This study aims at making briquettes and the physicochemical characterization of Licuri bark aiming to expand its use as fuel. The material was collected ... -
Comparação do método químico e método a plasma no preparo de nanocompósitos de prata e nanocelulose
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, Câmpus Sorocaba, 02/04/2020)Cellulose, being a biodegradable material, flexible and with good mechanical resistance, has been attracting great interest in studies, as it is a biopolymer from a renewable source and widely available in nature. It can ... -
Comportamento tribológico dos compósitos poliméricos utilizados no anel de atrito do amortecedor torcional de discos de embreagem
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, Câmpus Sorocaba, 18/11/2017)The three cylinder motors tend to vibrate more than the conventional four cylinder ones. In this new condition the transmission system and in particular the torsional damper of the clutch disc is subjected to sever wear ... -
Compósito de poliuretano elastomérico reforçado com fibra de juta: estudo das propriedades dinâmico-mecânicas e viscoelásticas
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, , 13/09/2013)Composite technology of a polymer matrix reinforced with artificial fibers, like fiberglass, Kevlar, carbon, etc., has become specialty in recent times moved by advances in technology in some sectors such as automotive and ... -
Compósitos de matrizes poliméricas com mantas aleatórias de fibras vegetais de sisal e de coco
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, , 15/03/2013)The search for new materials in order to alleviate the environmental problems have encouraged the use of raw materials of natural origin to replace, at least partially, to synthetically produced. Vegetable fibers may be ... -
Conjunto de dados de annealing aplicados a Termocronologia por traços de fissão em Zircão: estudo de caso de uma amostra brasileira
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, Câmpus Sorocaba, 10/03/2021)Fission Track Thermochronology (TTF) has been used for decades as a technique that makes it possible to date and infer the thermal history of rocks in regions of geological interest, from different minerals. The methodology ... -
Construção de equipamento de tratamento de superfície a plasma com fonte DC pulsada para tratamento de nitretação iônica.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, Câmpus Sorocaba, 06/10/2017)Surface treatment techniques such as plasma aided nitriding, although very well consolidated in the industry, must still be studied well and improved. Based on this idea and with the objective of looking for better treatment ... -
Construção de sistema eletroquímico com eletrodo circular para síntese de Polímeros Intrinsecamente Condutores: PIC's
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, Câmpus Sorocaba, 17/04/2015)This work involves the construction of a portable equipment device for electrochemical polymerization of an Intrinsically Conductive Polymer - PIC. Using a rotary circular electrode, this method’all allows the production ... -
Deposição e caracterização de filmes ultrafinos de óxido de titânio depositados por Sputtering RF
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, , 30/03/2012)This work studied ultrathin films of titanium oxide deposited by the technique r. f. reactive sputtering with different oxygen flows and different deposition times. Optical properties were studied (ultra-violeta/Visível) ... -
Deposição e caracterizações óptica e morfológica de filmes finos de TIOX depositados por sputtering R.F.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, , 19/02/2013)This work studied ultrathin films of titanium oxide were deposited on two substrates, such as pure Si (100) and glass corning 7059, by using r.f. magnetron sputtering with different oxygen flows and maintaining another ... -
Desenvolvimento da microscopia de força química usando modelagem molecular
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, , 19/03/2013)In this work was developed a prototype of a new nanobiosensor with molecular specificity through a study of theoretical models of Chemical Force Microscope. For the sensing were used molecular modeling techniques as well ...