Navegando Teses e dissertações por título
Itens para a visualização no momento 414-433 of 732
-
Fabricação de amostras maciças da liga Fe-Co-B-Si-Nb com estrutura amorfa pela rota de atomização e extrusão a quente
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 23/08/2018)Metallic glasses alloys are a relatively new class of materials characterized by the absence of structural long-range order. During heating, these alloys exhibit a glass transition at a temperature (Tg) before reaching the ... -
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 19/02/2020)The present study evaluated the mechanical properties in monotonic and cyclic stress of two low-density steel designed by thermodynamic calculations aiming stacking fault energy values that would allow different plasticity ... -
Fadiga de ligas de titânio com superfície modificada com nanotubos
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 29/07/2016)Among the surface modification techniques to improve the fixation, biocompatibility and corrosion resistance of titanium implants, one of the most recent and promising is the electrochemical anodization in electrolytes ... -
Filmes de nanocristais e nanofibrilas de celulose de eucalipto e abacaxi (curauá) por continous casting
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 24/02/2017)New materials from cellulose have been developed, such as cellulose nanocrystals (CNC) and cellulose nanofibrils (CNF). Different morphologies of the cellulose can lead to the formation of films with different ... -
Formação de grãos ferríticos ultrafinos através de transformação de fase induzida por deformação
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 26/10/2007)One of the key points in steel development has been the refinement of the microstructure, however without change the chemical composition with addition of alloy elements. The refinement of the ferrite grain size leads ... -
Formação de hexaluminato de cálcio in situ em refratários macroporosos: caminhos para o desenvolvimento de isolantes térmicos mais eficientes e ecológicos
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 28/07/2020)Macroporous thermal insulators have recently emerged industrial interest due to their low thermal conductivity and toxicity compared to fiber-based insulators. Nonetheless, some challenges need to be overcome to enable a ... -
Fornos para fusão e espera para indústria de alumínio : caracterização de materiais refratários e conservação de energia
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 26/07/2012)The industrial need to reduce energy consumption is part of a continuous evolution towards higher levels of sustainability and competitiveness. Considering these aspects, the search for alternatives to improve the performance ... -
Fotoluminescência dos compostos (Ba1-xSrx)MoO4 sintetizados com diferentes solventes
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 15/10/2013)The molybdates with scheelite-type tetragonal structure is a family of inorganic materials that has received considerable attention since the discovery of their luminescent properties, with emission in the visible spectral ... -
Fracture of refractories at room and elevated temperatures analyzed with wedge splitting tests and image correlation
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 20/02/2024)Industrial high-temperature processes relies on castable refractories, whose formulation and characterization become crucial for minimizing energy loss and costs. Increasing the failure predictability is key to reducing ... -
Friction riveting of aluminium alloy 6056-T6 with short-glass-fiber-reinforced polyamide 6 composite
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 11/08/2017)Friction Riveting (FricRiveting) is a relatively new joining technique for metal-polymer hybrid structures. This master thesis was carried out to investigate the FricRiveting process for polyamide 6 reinforced with 30 wt% ... -
Friction riveting of TI-6AL-4V and pultruded glass fiber reinforced thermoset polyester hybrid joints
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 18/12/2015)Friction Riveting is an innovative spot joining technology for metal-polymer hybrid structures. This MSc thesis provided for the first time in the literature, a fundamental understanding on the Friction Riveting process ... -
Friction spot joining of aluminum alloy 2024-t3 and carbon-fiber-reinforced polyphenylene sulfide composite laminate with additional pps film interlayer
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 30/11/2015)Friction Spot Joining (FSpJ) is a prize-winning joining technique for hybrid metal-polymer composite structures. This master thesis was devised to investigate the feasibility of FSpJ of metal-composite structures with ... -
Friction surfacing of aluminum alloy 5083-H112 over AA 2024-T3
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 23/03/2018)Friction surfacing (FS) is an advanced solid-state process in surface modification with increasing applications in reclaiming worn parts, hardfacing and corrosion protection. It is considered a derivation of the friction ... -
Fundamentos, experimentos e simulação de tintas térmicas para aplicação em fornos cerâmicos
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 13/03/2019)Regarding the current need of higher sustainability and cost reductions of industrial processes, some require high amounts of energy due to the high temperatures involved being siderurgy a good example. In these scenarios ... -
Graftização de anidrido maleico em polipropileno, por extrusão reativa, na presença de nanopartículas: estudo de reação e monitoramento in-line
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 17/04/2014)The grafting reaction of maleic anhydride onto polypropylene by reactive extrusion, in presence of nanoclay, was studied. The organoclay (Cloisite 20A) was used as support for dicumyl peroxide (DCP), and different amounts ... -
Graftização de polipropileno-G-anidrido maleico sobre microesferas ocas de vidro por extrusão reativa
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 24/08/2018)Using a maleic grafted polypropylene copolymer as a compatibilizing agent on a composite with hollow glass microspheres HGM is one way to reduce the mechanical properties decrement associated to the round, hollow, hydrophilic ... -
Grau de cisão de cadeia na degradação termomecânica de polímeros sob multiplas extrusões
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 14/09/2004)One of the ways to follow the polymer degradation has been to calculate the average number of chain scissions (ns) that occurred during its thermomechanical history. The average can be extended for each molecular weight ... -
Highly porous geopolymers: effect of the processing route on the reached properties
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 10/02/2015)Os geopolímeros (polímeros inorgânicos) têm atraído a atenção da academia por várias razões, em particular pelo fato de ser considerado um material sustentável onde subprodutos industriais podem ser utilizados como matéria ... -
Identificação das variáveis que ocasionam a variação de tonalidade utilizando a técnica de decoração por cilindros de silicone gravados a laser
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 30/11/2015)A major problem in the production of ceramic tiles for coating is the variation of tonality. The determination of their origin within the entire production process and to minimize its occurrence by the manufacturer is ... -
Identificação de um modelo constitutivo para simulação computacional do processo de prensagem a frio de um material refratário sílico-aluminoso
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 05/08/2016)One of the methods for the processing of refractory material is cold pressing of the powder material, followed by sintering. Heterogeneous distribution of density can occur in the green compact during pressing because of ...