Search
Now showing items 11-20 of 25
Comportamento elétrico de nanocompósitos baseados em copolímeros em bloco e nanotubos de carbono
(Universidade Federal de São Carlos, 2017-06-23)
In this work conductive polymer nanocomposites (CPNs) based on block copolymers and multi walled carbon nanotubes (MWCNT) were obtained. Two of the copolymers were commercial: polystyrene-b-polybutadiene-b-polystyrene ...
Desenvolvimento de nanocompósitos poliamida 11 / dióxido de titânio para aplicação na indústria petrolífera
(Universidade Federal de São Carlos, 2015-08-31)
The depth at which explores offshore oil grew abruptly, forcing the
advancement of technology in relation to the knowledge acquired so far. For the
risers operating conditions, subject to internal relatively low pressures, ...
Avaliação do comportamento mecânico de nanocompósito de PEEK/nHA sob curta e longa duração para aplicação como biomaterial
(Universidade Federal de São Carlos, 2012-04-27)
The main objectives of this dissertation were to study the short (tensile and impact) and long-term (fatigue) mechanical behavior of nanocomposites of poly(ether-ether-ketone), PEEK, with nanohydroxyapatite, nHA, for ...
Obtenção e caracterização de nanocompósitos de poli(cloreto de vinila): plastisol com argila
(Universidade Federal de São Carlos, 2011-03-03)
This project aims to study the effect of adding nanoparticles in the plastisol of poly(vinyl chloride) microsuspension. The influence of two different types of nanoclay, sodium montmorillonite and organophilic montmorillonite ...
Influência da geometria da nanocarga na estruturação, orientação e propriedades de filmes tubulares de nanocompósitos de PA6
(Universidade Federal de São Carlos, 2012-06-13)
The structure and morphology of polymers and consequently their properties are dependent on the processing conditions. During the blown film process, high shear and elongational flows can induce a preferred orientation of ...
Processamento e estudo das propriedades de filmes e peças injetadas de nanobiocompósitos de nanocristais de celulose e matrizes biodegradáveis
(Universidade Federal de São Carlos, 2014-04-04)
This study aimed at evaluating the potential of application of cellulose nanocrystals as reinforcing elements of biodegradable polymeric matrices, in the films and injection molded pieces applications. Two polymeric matrices ...
Propriedades de armazenagem de hidrogênio de materiais à base de magnésio e ferro preparados por moagem de alta energia e técnicas de deformação plástica severa
(Universidade Federal de São Carlos, 2013-05-24)
In the doctoral research, the hydrogen storage properties of magnesiumiron based materials prepared by high energy ball milling and techniques of severe plastic deformation were studied. The materials were processed by ...
Desenvolvimento e caracterização de nanocompósitos de blendas de PA6/AES compatibilizadas com copolímero acrílico
(Universidade Federal de São Carlos, 2014-03-31)
Toughened polyamide 6 (PA6) nanocomposites were obtained by incorporation of acrylonitrile-EPDM-styrene (AES). As compatibilizing agents was used the copolymer methyl methacrylate-anhydride (MMA-MA). The effect of the ...
Avaliação de sistemas compatibilizantes nas correlações entre processamento e propriedades térmicas, mecânicas e de transporte em nanocompósitos de blenda HDPE/LLDPE e OMMT
(Universidade Federal de São Carlos, 2012-04-11)
Polyolefin nanocomposites have attracted significant technological and scientific interest due to the possibilities of improvements in thermal, mechanical and barrier properties. However, the hydrophobic nature of polyolefins ...
Influência da nanoargila (O-MMT) nas propriedades mecânicas de polipropileno reforçado com fibra de vidro
(Universidade Federal de São Carlos, 2014-07-01)
Hybrid filler reinforced thermoplastics composed with short glass fiber (GF) and different particulate fillers present special interest for engineering applications, as substantial reductions in mechanical anisotropy and ...