Buscar
Mostrando ítems 121-130 de 143
Identificação dos parâmetros do modelo de Drucker-Prager/CAP para estudo da densificação mecânica de alumina atomizada
(Universidade Federal de São Carlos, 2019-06-27)
Pressing followed by sintering is among the most versatile materials processing
routes and suits different classes of materials: ceramic, polymeric and metallic.
In the last decade, this processing route has been gaining ...
Concretos refratários avançados contendo nano-óxidos produzidos pelo Método Pechini
(Universidade Federal de São Carlos, 2018-06-06)
Recently there is a great effort to use the benefits of nanometric powders additions in the matrices of advanced refractory concretes of ; low (LC), ultra low (ULC) and no cement (NC) refractory concretes, in order to make ...
Desenvolvimento de cerâmicas refratárias engenheiradas densas e porosas
(Universidade Federal de São Carlos, 2019-09-04)
High temperature processes are of great importance as they are widely applied in the manufacture of commodities, consumer goods and advanced materials. For these processes to be possible, the thermal environment in which ...
Síntese in situ pelo método Pechini e sinterização por métodos não convencionais de compósitos magnetoelétricos particulados
(Universidade Federal de São Carlos, 2015-11-27)
This thesis aimed the synthesis via in situ by Pechini method and the sintering by conventional and unconventional methods (microwave and spark-plasma) of particulates magnetoelectrics composites (ME) of ferroelectric ...
O uso de um vidro altamente bioativo para conferir bioatividade à superfície do titânio: desenvolvimento de um método para recobrimentos descontínuos
(Universidade Federal de São Carlos, 2013-03-15)
Bioactive glasses - or glass-ceramics, exhibit the largest known bioactivity index due to their osteoinductive property - among others. Theirs bonding to bone is also one of the strongest known, but they have poor mechanical ...
Resistência à fadiga de junta circunferencial de um tubo API 5L x 70 em contato com etanol
(Universidade Federal de São Carlos, 2016-09-19)
Circumferential field-welding joints of oil pipelines are susceptible to defects that may lead to failures when in operation. The type of product to be transported is an important factor in the evaluation of environment-induced ...
Obtenção e caracterização estrutural, microestrutural e elétrica do condutor protônico BaCe1-xYxO3-δ com e sem aditivo de sinterização
(Universidade Federal de São Carlos, 2016-12-19)
The study of solid electrolytes (SE) is important to the scientific and technological development of materials used in application related to clean energy generation, such as Solid Oxide Fuel Cells (SOFCs). Yttrium-doped ...
Desenvolvimento de compósitos poliméricos flexíveis com alta constante dielétrica obtidos a partir de polímeros baseados em pvdf e da perovskita ncbcto
(Universidade Federal de São Carlos, 2018-12-19)
The objective of this thesis was to produce polymer/perovskite based composites to be used as supercapacitors; the composites were made by incorporating an specified type of perovskite (Na1/3Ca1/3Bi1/3Cu3Ti4O12, NCBCTO) ...
Estudo da obtenção de nitreto de boro hexagonal por rotas de síntese assistidas por micro-ondas
(Universidade Federal de São Carlos, 2018-02-05)
Boron nitride (h-BN) is an attractive ceramic material that combines
excellent thermal, electrical and chemical properties. The combination of these
properties makes h-BN useful in the manufacturing of lubricants, ...
Estudo de ligas Ti-Nb-Zr e Ti-Nb-Mg, fundidas e na forma de recobrimentos sobre aço inoxidável, para aplicações biomédicas
(Universidade Federal de São Carlos, 2019-10-31)
In the present thesis, nanostructured coatings of Ti (100 - (20 + z)) -Nb20-Xz alloys (X = Zr and Mg) were produced by sputtering. So with that, it was possible to analyze the effect of the addition of Zr and Mg on the ...