Buscar
Itens para a visualização no momento 41-50 of 143
Comportamento elétrico de nanocompósitos baseados em copolímeros em bloco e nanotubos de carbono
(Universidade Federal de São Carlos, 2017-06-23)
In this work conductive polymer nanocomposites (CPNs) based on block copolymers and multi walled carbon nanotubes (MWCNT) were obtained. Two of the copolymers were commercial: polystyrene-b-polybutadiene-b-polystyrene ...
Sinterização por micro-ondas em uma e em duas etapas de varistores à base de ZnO
(Universidade Federal de São Carlos, 2013-09-30)
This thesis is aimed at one-step microwave sintering at frequencies of 2.45 GHz and 30 GHz and the development of two-step microwave sintering (MW-TSS) at 2.45 GHz of ZnO-based nanostructured semiconductor compositions for ...
Deformação piroplástica em porcelanatos
(Universidade Federal de São Carlos, 2016-09-09)
In recent years porcelain stoneware tiles showed the highest growth in
production and consumption in ceramic industry sector. To achieve low
porosity, which ensures the high performance of the product, is required ...
Avaliação da cinética de degradação abiótica do polietileno de alta densidade, na presença e ausência de aditivo pró-degradante e estabilizantes
(Universidade Federal de São Carlos, 2016-11-28)
The convenience of single-use packaging of high density polyethylene (HDPE) led to the need to convert them into biodegradable materials in less time to minimize the environmental problems caused by disposal. An alternative ...
Avaliação de fibras de gravatá, macaúba e curauá para aplicação em compósitos de polipropileno obtidos por mistura termocinética
(Universidade Federal de São Carlos, 2018-06-18)
The objective of this project was the study of polypropylene and natural fibers high filled composite panels, with and without coupling agents, and the extraction and study of three species of natural fibers as potential ...
Preparação, caracterização e otimização de biocompósitos poliméricos comestíveis reforçados com fibras vegetais
(Universidade Federal de São Carlos, 2017-05-19)
The ever-growing environmental concern arising from the unrestricted exploitation of fossil raw materials for the massive production of non-biodegradable materials, guided by the rapid increase in the world population as ...
Vitrocerâmicas condutoras de íon lítio com estrutura do tipo Nasicon baseadas no sistema Li1+X CrX (GeY Ti1-Y)2-X (PO4)3
(Universidade Federal de São Carlos, 2018-03-22)
The primary goal of this work is to develop a new NASICON-structured glass-ceramic with high
Li-ion conductivity. Therefore, this work introduces a new series of NASICON-type compositions
based on the Li1+xCrx(GeyTi1-y)2-x(PO4)3 ...
Microestrutura e propriedades mecânicas da liga AA6061 processada por deformação plástica severa em temperatura criogênica
(Universidade Federal de São Carlos, 2017-08-08)
The present work aimed two fronts: to characterize the mechanical behavior of the AA6061 alloy at cryogenic temperature, and to study the microstructural and properties evolution after cryogenic severe plastic deformation. ...
Desenvolvimento de novas ligas quasicristalinas à base de alumínio
(Universidade Federal de São Carlos, 2018-03-21)
Quasicrystalline phases are known for presenting particular crystallographic characteristics that make them a separate group of solid materials. Most of these phases are Al-based and they form in compositions near complex ...
Influência da mistura gasosa e da temperatura no processo de nitrocarbonetação a plasma do aço DIN 100Cr6
(Universidade Federal de São Carlos, 2018-08-10)
The surface treatments of metal alloys allow improving the surface qualities by the deposition of another material or by surface modification, producing coatings. The nitrocarburizing, considered one of the most important ...