Search
Now showing items 1-10 of 466
Caracterização de interfaces para aplicações em ultra-alto vácuo através de brasagem dissimilar entre nitreto de boro hexagonal (h-BN), a liga de adição Ag-Cu-Ti e o Mo metálico
(Universidade Federal de São Carlos, 2020-08-14)
This work aimed to evaluate the vacuum brazing of h-BN/Mo systems for fabrication of the BPM (Beam Position Monitor) in synchrotron radiation beam. The h-BN has low surface wettability and is difficult to weld. The materials ...
Modificação microestrutural da liga de magnésio AZ31 por fricção e mistura a altas velocidades
(Universidade Federal de São Carlos, 2015-07-03)
Due to the current growth in the fossil fuels consumption, there is a great concern about the increase in pollutant emissions. In order to reduce these emissions, research indicates that the decrease in vehicle weight can ...
Nanopartículas de Fe3O4 funcionalizadas e nanocompósitos de base epóxi
(Universidade Federal de São Carlos, 2015-12-17)
The use of metal oxide nanoparticles in nanocomposite has provided new
and interesting properties and is one of the most promising areas in composites.
Compatibility between these nanoparticles and polymer matrix is the ...
Study of rutile-supported anatase nanostructured films as photocatalysts for the degradation of water contaminants
(Universidade Federal de São Carlos, 2015-03-30)
This dissertation studies the application of rutile substrate as an alternative support for anatase films, specifically, on the growth and properties of anatase films. The films were utilized as catalysts for the ...
Caracterização estrutural e monitoramento ótico da cristalização de nanocompósitos de polietileno de alta densidade com partículas de diferentes geometrias durante a moldagem por injeção
(Universidade Federal de São Carlos, 2014-03-06)
The main objectives of this project were to study the morphology, the crystallization
kinetics and to monitor on-line the crystallization during the injection
molding process using an optical system of nanocomposites of ...
Influência do defeito tipo cunha no comportamento mecânico de juntas de liga de alumínio 2198 soldadas por fricção por ponto (FSpW)
(Universidade Federal de São Carlos, 2015-02-01)
One of the main considerations in selecting materials to manufacture
aircraft structures is related to weight saving [1]. In this context, the promising
aluminum-lithium alloys have been receiving special attention in ...
Estudo da dispersão, localização seletiva e efeito compatibilizante de argila montmorilonita em blendas poliméricas de policarbonato/SAN
(Universidade Federal de São Carlos, 2015-03-30)
The present study investigated the compatibilization effect and stabilization on the morphology of polycarbonate/styrene-acrylonitrile blends (PC / SAN) by incorporating montmorillonite clay. A systematic study was realized ...
Influência das condições de eletrodeposição sobre a resistência a corrosão, susceptibilidade à fragilização por hidrogênio e à corrosão sob tensão do aço ABNT – 4340 revestido com liga Zn/Ni
(Universidade Federal de São Carlos, 2011-01-28)
Zinc-nickel alloys were electrodeposited on ABNT 4340 high strength steel in chloride acid media. The effect of the electrolyte composition and electroplating conditions on cathodic efficiency, chemical composition, ...
Spray forming of wear and corrosion resistant bimetallic pipes : from the alloy design to the semi- industrial process
(Universidade Federal de São Carlos, 2016-02-29)
The oil exploitation and production at the pre-salt fields in a safety and efficient
way depends on the development of materials that withstand the severe work
conditions found in these fields. For instance, pipes, such ...
Agentes mineralizadores e seus efeitos nas características morfológicas e físico-químicas de aluminas calcinadas
(Universidade Federal de São Carlos, 2015-08-31)
Calcination is an important step in the alumina production process, affecting the final properties of the resulting powder and the attained product. Over the previous decades, attempts have been conducted to understand ...