Buscar
Itens para a visualização no momento 1-10 of 23
Descrição termodinâmica via CALPHAD do líquido super-resfriado no Sistema Mo-Nb-B com o modelo de 2-Estados
(Universidade Federal de São Carlos, 2021-08-12)
In the present work, we will use the Thermo-CalcTM software to model
with the CALPHAD method the super-cooled liquid (SCL) that leads to the
formation of metallic vitreous materials. This research aims to improve ...
Produção por fusão seletiva a laser de revestimentos resistentes ao desgaste utilizando a liga Fe68Cr8Mo4Nb4B16
(Universidade Federal de São Carlos, 2021-06-29)
Amorphous/crystalline Fe-based alloys are promising materials as protective coatings due to their high crystallization temperatures, high hardness and excellent resistance against corrosion and wear. The application of ...
Estabilidade microestrutural da liga Cu-0,8Cr-0,07Zr após extrusão em canal angular em temperatura criogênica
(Universidade Federal de São Carlos, 2021-12-20)
Severe Plastic Deformation (SPD) are well established routes with regard to the
intense microstructural refining of metals and alloys up to the submicrometer (<
1 μm) and/or nanometer (< 100 nm) scales. Lowering the ...
Comportamento de oxidação em temperaturas elevadas de ligas NiTiNb com efeito memória de forma
(Universidade Federal de São Carlos, 2021-09-10)
Shape memory alloys (SMA) of the Nickel-Titanium (NiTi) system are currently the most commercially important, due to their excellent mechanical properties, high shape recovery and biocompatibility. Such a unique set of ...
Mg-containing multicomponent alloys produced by high-energy ball milling for hydrogen storage
(Universidade Federal de São Carlos, 2020-02-20)
Hydrogen is a promising energy carrier that allows the use of energy in a sustainable form. However, safe and efficient hydrogen storage is a scientific and technological challenge that still has to be overcome. Recently ...
Influência da adição de cério na microestrutura e comportamento de oxidação de aços inoxidáveis Fe-Mn-Si-Cr-Ni com efeito de memória de forma
(Universidade Federal de São Carlos, 2020-01-15)
In this study, the influence of small cerium additions on the microstructure and
oxidation behavior of Fe-Mn-Si-Cr-Ni shape memory stainless steels (SMSSs)
was investigated. The results show that the Ce addition in the ...
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...
Efeito do revenimento sobre a resistência à corrosão do aço inoxidável uns s41426
(Universidade Federal de São Carlos, 2020-02-28)
Supermartensitic stainless steels were developed during the 1990s as an alternative to duplex stainless steels for manufacture of oil country tubular goods. As a result of microstructural variations caused during tempering ...
Estudo da viabilidade de formação de nitreto de boro em aços inoxidáveis ferríticos
(Universidade Federal de São Carlos, 2020-03-02)
Since the 90s, the petroleum industry has been conducting research on alloys that are wear and corrosion resistant once several equipment parts used in the oil exploitation, extraction and production, such as pipes, joints, ...
Manufatura aditiva da liga reciclada Al-Fe-Cr-Ti formadora de fase quasicristalina
(Universidade Federal de São Carlos, 2020-02-27)
The precipitation of quasicrystalline phase in an α-Al dendritic matrix provides Al-based alloys with high mechanical and wear resistance, mainly at high temperatures, which are promising for applications as automotive and ...