Buscar
Itens para a visualização no momento 21-30 of 99
Ligas multicomponentes do sistema Ti33Cr37V30-xNbx (X: 0, 5, 10 e 15) para armazenamento de hidrogênio
(Universidade Federal de São Carlos, 2021-11-30)
The use of metal hydrides is a competitive alternative to hydrogen storage in liquid or gaseous states. Metallic alloys based on the TiCrV system have attractive hydrogen storage characteristics compared with those of the ...
Comportamento de oxidação em temperaturas elevadas de ligas NiTiNb com efeito memória de forma
(Universidade Federal de São Carlos, 2021-09-10)
Shape memory alloys (SMA) of the Nickel-Titanium (NiTi) system are currently the most commercially important, due to their excellent mechanical properties, high shape recovery and biocompatibility. Such a unique set of ...
Desenvolvimento de cimentos ósseos à base de Biosilicato
(Universidade Federal de São Carlos, 2020-03-27)
Synthetic grafts have an important contribution to modern health care, especially in bone reconstruction surgeries. In addition orthopedics, bone grafts can also be used in maxillofacial surgery. In 1980s, bone cements ...
Estudo do comportamento eletromecânico de músculos artificiais baseados em compósitos de polímero ionomérico e metal por meio da análise de vídeo
(Universidade Federal de São Carlos, 2020-04-13)
Ionomeric polymer-metal composites (IPMCs) are smart materials, which have a metal/polymer/metal sandwich-like structure and are capable to deform in response to electrical stimuli and vice versa. In addition, they have ...
Mg-containing multicomponent alloys produced by high-energy ball milling for hydrogen storage
(Universidade Federal de São Carlos, 2020-02-20)
Hydrogen is a promising energy carrier that allows the use of energy in a sustainable form. However, safe and efficient hydrogen storage is a scientific and technological challenge that still has to be overcome. Recently ...
Influência da adição de cério na microestrutura e comportamento de oxidação de aços inoxidáveis Fe-Mn-Si-Cr-Ni com efeito de memória de forma
(Universidade Federal de São Carlos, 2020-01-15)
In this study, the influence of small cerium additions on the microstructure and
oxidation behavior of Fe-Mn-Si-Cr-Ni shape memory stainless steels (SMSSs)
was investigated. The results show that the Ce addition in the ...
Estabilidade e habilidade de formação de vidros óxidos
(Universidade Federal de São Carlos, 2020-03-02)
The glass-forming ability (GFA) is a measure of the easiness of vitrification of a liquid during cooling from the liquidus temperature. The GFA is inversely proportional to the critical cooling rate (Rc), whose determination ...
Synthesis and graphitization of phenolic resins for carbon-containing refractory applications
(Universidade Federal de São Carlos, 2020-02-03)
Carbon-containing refractories’ (CCRs) present special chemical and thermomechanical properties, which depend on the presence of carbonaceous phase with a structure similar to those of graphite. However, phenolic resins ...
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...
Formação de hexaluminato de cálcio in situ em refratários macroporosos: caminhos para o desenvolvimento de isolantes térmicos mais eficientes e ecológicos
(Universidade Federal de São Carlos, 2020-07-28)
Macroporous thermal insulators have recently emerged industrial interest due to their low thermal conductivity and toxicity compared to fiber-based insulators. Nonetheless, some challenges need to be overcome to enable a ...