Buscar
Itens para a visualização no momento 11-20 of 37
Produção por fusão seletiva a laser de revestimentos resistentes ao desgaste utilizando a liga Fe68Cr8Mo4Nb4B16
(Universidade Federal de São Carlos, 2021-06-29)
Amorphous/crystalline Fe-based alloys are promising materials as protective coatings due to their high crystallization temperatures, high hardness and excellent resistance against corrosion and wear. The application of ...
Influência da adição de Nb-B na microestrutura de solidificação da liga Al-0,8%Mg-0,7%Si (6201)
(Universidade Federal de São Carlos, 2022-04-11)
The AA6201 alloy, widely used in the manufacturing of power cables, was modified by the addition of a Al-Nb-B master alloy in order to investigate the possible effects on the microstructure. Therefore, the Al-0.8%Mg-0.7%Si ...
Estabilidade microestrutural da liga Cu-0,8Cr-0,07Zr após extrusão em canal angular em temperatura criogênica
(Universidade Federal de São Carlos, 2021-12-20)
Severe Plastic Deformation (SPD) are well established routes with regard to the
intense microstructural refining of metals and alloys up to the submicrometer (<
1 μm) and/or nanometer (< 100 nm) scales. Lowering the ...
Simulação física da ZTA de aços inoxidáveis lean duplex 2101 e 2404 em sistema Gleeble®: evolução microestrutural e resistência à corrosão
(Universidade Federal de São Carlos, 2022-06-08)
In this study, physical simulations of welding thermal cycles were performed to evaluate the microstructural evolution and corrosion resistance of the heat-affected zones (ZTAs) of lean duplex stainless steels (LDSSs) 2101 ...
Comportamento de oxidação em temperaturas elevadas de ligas NiTiNb com efeito memória de forma
(Universidade Federal de São Carlos, 2021-09-10)
Shape memory alloys (SMA) of the Nickel-Titanium (NiTi) system are currently the most commercially important, due to their excellent mechanical properties, high shape recovery and biocompatibility. Such a unique set of ...
Avaliação de corrosão sob tensão e corrosão-fadiga do aço API 5L X70 em solução etanólica sintética
(Universidade Federal de São Carlos, 2022-04-07)
API X70 steel has been widely used in Brazil for the manufacture of ethanol transport pipelines, however, a recognized problem in carbon steel pipes exposed to ethanol is stress corrosion cracking (SCC) and, in addition, ...
Panorama das atividades de extensão do departamento de engenharia de materiais da UFSCar e oportunidades para sua curricularização na graduação
(Universidade Federal de São Carlos, 2023-01-23)
Guidelines for service-learning’s curricular use in graduation ensures 10% of the
total student workload of undergraduate courses to service-learning activity. This
policy has potential to offer benefits in mutual ...
Mg-containing multicomponent alloys produced by high-energy ball milling for hydrogen storage
(Universidade Federal de São Carlos, 2020-02-20)
Hydrogen is a promising energy carrier that allows the use of energy in a sustainable form. However, safe and efficient hydrogen storage is a scientific and technological challenge that still has to be overcome. Recently ...
Influência da adição de cério na microestrutura e comportamento de oxidação de aços inoxidáveis Fe-Mn-Si-Cr-Ni com efeito de memória de forma
(Universidade Federal de São Carlos, 2020-01-15)
In this study, the influence of small cerium additions on the microstructure and
oxidation behavior of Fe-Mn-Si-Cr-Ni shape memory stainless steels (SMSSs)
was investigated. The results show that the Ce addition in the ...
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...