Buscar
Itens para a visualização no momento 31-40 of 160
Injection overmolding of polycarbonate-aluminum alloys hybrid structures
(Universidade Federal de São Carlos, 2023-03-24)
Overlap joints between polycarbonate (PC) and aluminum alloys AA6061 and AlSi10Mg were manufactured by injection overmolding and evaluated regarding the interfacial structure and mechanical performance. The injection ...
Desenvolvimento e caracterização de biocompósitos de blendas TPU/PCL com hidroxiapatita para produção de scaffolds bioativos via impressão 3D
(Universidade Federal de São Carlos, 2022-08-02)
The increasing need for biological tissues to treat defects caused by disease or injury has demanded new solutions to provide functional substitutes that supply tissue shortages and suit the needs of each patient. In this ...
Desenvolvimento de compósito epóxi/fibra de vidro produzido por enrolamento filamentar para revestimento interno de coluna de produção de petróleo em aço carbono na exploração offshore
(Universidade Federal de São Carlos, 2021-08-04)
Epoxy/glass fiber composites (GRE) were produced by filament winding with a view to application as a liner in a carbon steel tube to replace all-metal super duplex stainless steel column in offshore petroleum exploration. ...
Descrição termodinâmica via CALPHAD do líquido super-resfriado no Sistema Mo-Nb-B com o modelo de 2-Estados
(Universidade Federal de São Carlos, 2021-08-12)
In the present work, we will use the Thermo-CalcTM software to model
with the CALPHAD method the super-cooled liquid (SCL) that leads to the
formation of metallic vitreous materials. This research aims to improve ...
Atomização a gás do aço ferramenta A2: efeito dos parâmetros de processo nas características do pó
(Universidade Federal de São Carlos, 2022-03-23)
Gas atomization is the main method in powder metallurgy to produce powders for additive manufacturing (AM). The gas atomization process allows generally spherical and very fine metallic powders with great yield on the ...
Avaliação das propriedades de armazenagem de hidrogênio através de reação sólido-gás e eletroquímica da liga multicomponente (TiNb)(CrMnFe)₂ com estrutura de Fase Laves tipo C14
(Universidade Federal de São Carlos, 2023-02-24)
Hydrogen is critical for storage and transport of renewable energy. Because it is low-density gas, one of the biggest challenges of its widespread use as an energy vector is in its hardly storage. Metal hydrides are strategic ...
Synthesis and characterization of CH3NH3SnI3, Mn doped CH3NH3SnI3 and oxygen-deficient TiO2 as visible-light active semiconductors
(Universidade Federal de São Carlos, 2020-02-14)
CH3NH3SnI3 is an environmentally-friendly (lead-free) perovskite whose synthesis depends on SnI2. Some disadvantages of SnI2 include high cost and tin(IV) contamination. Thus, SnSO4 and C16H30O4Sn are presented as cheaper ...
Efeito do inoculante Al-Nb-B na microestrutura e propriedades mecânicas da liga AA2017 fabricada por fusão em leito de pó a laser
(Universidade Federal de São Carlos, 2023-01-24)
The blending of finer powders of Ti, Zr, Ta, Sc, and Nb compounds as inoculants has been a promising strategy to modify precipitation-hardened aluminum alloys for laser-based powder bed fusion process (L-PBF), promoting a ...
Reaproveitamento de resíduos da agroindústria da laranja para a produção de compostos biodegradáveis em matriz de PBS
(Universidade Federal de São Carlos, 2021-09-24)
The employment of biodegradable polymers is a partial solution to the problem of environmental plastic pollution, since conventional polymers are resistant to many environmental influences and it may take centuries for ...
Sistemas de estabilização em polipropileno submetidos à radiação UV-C
(Universidade Federal de São Carlos, 2023-04-28)
UV-C radiation (200 - 280 nm) is a range of the electromagnetic spectrum with increasing and satisfactory studies as a method of disinfection against microorganisms, however, it is little studied in terms of degradation ...