Buscar
Itens para a visualização no momento 11-20 of 153
Juntas de aço inoxidável super duplex UNS S32760 soldadas por fricção e mistura mecânica (FSW): microestrutura e comportamento de corrosão eletroquímica
(Universidade Federal de São Carlos, 2022-04-29)
In this study, the corrosion resistance of the face and root surface of an AISD UNS S32760 friction stir welded (FSW) joint using optimized parameters was investigated. Microstructural changes were evaluated by MO, SEM and ...
Reciclagem de embalagens flexíveis multicamadas
(Universidade Federal de São Carlos, 2022-04-29)
Packaging industry is facing an important paradox in flexible plastic packaging for fresh food. While, food waste is avoided using multilayer and multi-material structures with barrier properties, that increase shelf life ...
Estudo da cinética de cristalização não-isotérmica de nanocompósitos de PLA/Haloisita
(Universidade Federal de São Carlos, 2021-08-27)
Poly(lactic acid) (PLA) is a biodegradable and biocompatible thermoplastic obtained from renewable sources and with similar properties when compared with petroleum-based polymers. The inclusion of nanoparticles is an ...
Design, processing, and characterization of high strength precipitation-hardened CrCoNiAlTi high entropy alloys
(Universidade Federal de São Carlos, 2023-03-22)
High Entropy Alloys (HEAs) have been attracting considerable interest in literature. While early studies focused on producing single-phase HEAs, more recent investigations have expanded to multi-phase compositions to take ...
Caracterização de interfaces para aplicações em ultra-alto vácuo através de brasagem dissimilar entre nitreto de boro hexagonal (h-BN), a liga de adição Ag-Cu-Ti e o Mo metálico
(Universidade Federal de São Carlos, 2020-08-14)
This work aimed to evaluate the vacuum brazing of h-BN/Mo systems for fabrication of the BPM (Beam Position Monitor) in synchrotron radiation beam. The h-BN has low surface wettability and is difficult to weld. The materials ...
Compósitos de poli(éter imida) com partículas nanoestruturadas de LaNi₅ para armazenamento de hidrogênio
(Universidade Federal de São Carlos, 2023-07-14)
Hydrogen is a promising energy vector for decarbonizing the energy
matrix, but its widespread use requires safe and efficient storage systems. This
study aimed to produce microparticles of polyetherimide with LaNi5 through ...
Soldagem por ponto por fricção das ligas de alumínio 5A06-O/2219-T87: caracterização mecânica e microestrutural
(Universidade Federal de São Carlos, 2022-11-30)
Refill Friction Stir Spot Welding (RFSSW) is a solid-state joining technique for welding dissimilar and similar materials applied to light alloys and thermoplastics. Thus, the purpose of this work was to evaluate the ...
Passivação de aços contendo baixo cromo (4 - 6 %massa) como reforços de matrizes cimentícias curadas por carbonatação
(Universidade Federal de São Carlos, 2023-08-08)
Reinforced concrete, composed of Portland cement and carbon steel, is an affordable material for projects, with satisfactory mechanical properties for civil construction. The alkaline solution in the concrete's pores ...
Ligas beta Ti-Nb-Zr(-Ta-Mo) multiprincipais com baixo módulo de elasticidade
(Universidade Federal de São Carlos, 2023-07-25)
The use of Ti-6Al-4V alloy as a biomaterial is more convenient among Ti alloys,
as it is produced on a larger scale due to aeronautical applications. However, it
is known that Ti-6Al-4V alloy can be harmful to the patient’s ...
Compósitos biodegradáveis a partir de poli(succinato de butileno) e resíduos de cacau para manufatura aditiva
(Universidade Federal de São Carlos, 2023-01-26)
Additive manufacturing (AM) has developed a lot in recent years, however, the diversity of materials available for application in its different techniques is still limited and few biodegradable materials are available for ...