Buscar
Itens para a visualização no momento 1-10 of 55
Modificação microestrutural da liga de magnésio AZ31 por fricção e mistura a altas velocidades
(Universidade Federal de São Carlos, 2015-07-03)
Due to the current growth in the fossil fuels consumption, there is a great concern about the increase in pollutant emissions. In order to reduce these emissions, research indicates that the decrease in vehicle weight can ...
Nanopartículas de Fe3O4 funcionalizadas e nanocompósitos de base epóxi
(Universidade Federal de São Carlos, 2015-12-17)
The use of metal oxide nanoparticles in nanocomposite has provided new
and interesting properties and is one of the most promising areas in composites.
Compatibility between these nanoparticles and polymer matrix is the ...
Study of rutile-supported anatase nanostructured films as photocatalysts for the degradation of water contaminants
(Universidade Federal de São Carlos, 2015-03-30)
This dissertation studies the application of rutile substrate as an alternative support for anatase films, specifically, on the growth and properties of anatase films. The films were utilized as catalysts for the ...
Influência do defeito tipo cunha no comportamento mecânico de juntas de liga de alumínio 2198 soldadas por fricção por ponto (FSpW)
(Universidade Federal de São Carlos, 2015-02-01)
One of the main considerations in selecting materials to manufacture
aircraft structures is related to weight saving [1]. In this context, the promising
aluminum-lithium alloys have been receiving special attention in ...
Estudo da dispersão, localização seletiva e efeito compatibilizante de argila montmorilonita em blendas poliméricas de policarbonato/SAN
(Universidade Federal de São Carlos, 2015-03-30)
The present study investigated the compatibilization effect and stabilization on the morphology of polycarbonate/styrene-acrylonitrile blends (PC / SAN) by incorporating montmorillonite clay. A systematic study was realized ...
Agentes mineralizadores e seus efeitos nas características morfológicas e físico-químicas de aluminas calcinadas
(Universidade Federal de São Carlos, 2015-08-31)
Calcination is an important step in the alumina production process, affecting the final properties of the resulting powder and the attained product. Over the previous decades, attempts have been conducted to understand ...
Processamento e caracterização de ligas a base de magnésio para uso como implantes bioabsorvíveis
(Universidade Federal de São Carlos, 2015-02-23)
Magnesium alloys have attracted great interest for use in temporary orthopedic implants to replace existing materials, due to the combination of physical, mechanical and corrosive properties. A magnesium based alloy ...
Influência de aditivos pró-degradantes nas degradações abiótica e biótica do polietileno de alta densidade
(Universidade Federal de São Carlos, 2015-03-06)
High density polyethylene (HDPE) is widely used in the manufacture of
packaging disposables and in order to minimize the environmental impact
caused by disposal, have been incorporated, into the HDPE, additives that
promises ...
Desenvolvimento e caracterização de tecidos vítreos flexíveis altamente bioativos
(Universidade Federal de São Carlos, 2015-10-26)
Bioactive glasses were developed by Hench in 1969, and are widely known to have the ability to rapidly form a chemical bond with hard and soft living tissues. Currently, these glasses have been used clinically as biomaterials ...
União pontual por fricção (“friction spot joining”) de alumínio 6181-T4 com compósito laminado de poli(sulfeto de fenileno) e fibra de carbono (CF-PPS)
(Universidade Federal de São Carlos, 2015-02-26)
The friction spot joining (FSpJ) emerges as an alternative and innovative
technique for producing polymer-metal hybrid structures. This technique was
developed and patented by HZG / Germany in 2012. The process uses ...