Search
Now showing items 11-20 of 33
Correlações entre microestrutura, parâmetros térmicos e propriedades mecânicas de ligas de alumínio da série 5xxx solidificadas unidirecionalmente
(Universidade Federal de São Carlos, 2017-08-04)
Processing high-Mg content Aluminum Alloys by continuous casting technics is considered an industry challenge. The present research aims to characterize 5xxx alloy series, considering composition based on the commercial ...
Otimização dos parâmetros de soldagem a ponto por Fricção (FSpW) da liga AlMgSc e avaliação das propriedades mecânicas estáticas e dinâmicas
(Universidade Federal de São Carlos, 2017-08-28)
Aluminum alloys are widely used in transportation industry to reduce structural weight and fuel consumption. The development of advanced alloys and more effective technologies for joining materials contribute to achieve ...
Estudo dos efeitos do biodiesel e suas misturas com óleo diesel em materiais metálicos
(Universidade Federal de São Carlos, 2017-03-09)
The use of biodiesel in vehicles can significantly reduce dependence on fossil fuels and help to reduce environmental pollution. However, there are concerns about the compatibility of automotive materials in contact with ...
Avaliação da resistência à corrosão localizada do alumínio em juntas dissimilares al-ti soldadas por fricção por ponto (FSpW)
(Universidade Federal de São Carlos, 2017-03-27)
The work evaluated the effect of the FSpW welding process on the aluminum surface in two overlapping welded joints, AA6181-T4/Ti-6Al-4V and AA5754-H22/Ti-6Al-4V. The microstructural changes were evaluated through optical ...
Estudo da resistência à corrosão de ligas de alumínio com grãos ultrafinos obtidos por deformação plástica severa através do processo ECAP
(Universidade Federal de São Carlos, 2017-10-02)
The present work evaluated the effect of severe plastic deformation and ultrafine grains, obtained through the ECAP (equal-channel angular pressing) process, in the corrosion resistance of AA1050 aluminum alloy. The ...
Evaluation of TI-6AL-4V friction surfacing coatings reinforced with carbides
(Universidade Federal de São Carlos, 2017-12-14)
Friction surfacing is a thermo-mechanical process employed to deposit coatings in solid state resorting to friction between a rotating consumable rod and a substrate. The current work focuses on deposition of Ti-6Al-4V ...
Processo de laminação com resfriamento criogênico em ligas de magnésio para armazenagem de hidrogênio
(Universidade Federal de São Carlos, 2017-08-25)
The use of metallic hydrides is a competitive alternative to the hydrogen storage in the liquid or gas states. The magnesium is cheap and forms the metal hydride with higher gravimetric capacity. In this work, the commercial ...
Refratários avançados sinterizados com líquidos transientes
(Universidade Federal de São Carlos, 2017-03-09)
Sintering additives (AS) have great potential to be applied in refractory castables as they reduce the densification temperature of these products. Additionally, these components may induce the generation of a transient ...
Deformação plástica severa da liga Ti-13Nb-13Zr
(Universidade Federal de São Carlos, 2017-03-03)
Biomedical devices currently in use (prostheses, implants) have satisfactory performance in many cases. However, sometimes the body reacts to the device insertion and may lead to its rapid replacement. Some of these ...
Produção, caracterização estrutural e propriedades de armazenagem de hidrogênio de ligas Mg-Zr
(Universidade Federal de São Carlos, 2017-03-31)
Magnesium is considered a promising candidate in applications of storage hydrogen in the solid state, due, among other factors, to its low relative cost and high gravimetric capacity (7,6 wt%.). For magnesium, the use of ...