Search
Now showing items 1-10 of 25
Moagem de alta energia e deformação plástica severa do Mg e do Mg-Fe na síntese de hidretos para armazenagem de hidrogênio
(Universidade Federal de São Carlos, 2017-03-04)
Magnesium is a light metal with a relatively low cost. It can form magnesium hydride (MgH2), which is interesting for the safe storage of hydrogen in the solid state, thanks to its high gravimetric capacity of 7.6%. The ...
Comportamento elétrico de nanocompósitos baseados em copolímeros em bloco e nanotubos de carbono
(Universidade Federal de São Carlos, 2017-06-23)
In this work conductive polymer nanocomposites (CPNs) based on block copolymers and multi walled carbon nanotubes (MWCNT) were obtained. Two of the copolymers were commercial: polystyrene-b-polybutadiene-b-polystyrene ...
Síntese de cerâmicas tipo perovskita com potencial uso em células solares
(Universidade Federal de São Carlos, 2017-03-07)
Visible light accounts for the biggest fraction of the solar irradiance. One of the strategies for achieving higher photovoltaic power conversion efficiency is the application of low band-gap materials (Eg ideal≈1.4 eV) ...
Desenvolvimento e caracterização de concretos refratários ligados quimicamente por fosfatos para aplicação em indústrias petroquímicas
(Universidade Federal de São Carlos, 2017-10-05)
The objective of this work was the development of chemically phosphatebonded
refractories for applications in petrochemical industries due to their
suitable properties such as high green mechanical strength, erosion ...
Propriedades de armazenagem de hidrogênio do intermetálico TiFe processado por moagem de alta energia e laminação a frio sob atmosfera controlada
(Universidade Federal de São Carlos, 2017-03-27)
TiFe is a material of practical interest for hydrogen storage due to its absorption capacity of ~ 1.9 wt. % H at room temperature and the relative low cost of its constituent elements. However, this intermetallic requires ...
Microestrutura e propriedades mecânicas da liga AA6061 processada por deformação plástica severa em temperatura criogênica
(Universidade Federal de São Carlos, 2017-08-08)
The present work aimed two fronts: to characterize the mechanical behavior of the AA6061 alloy at cryogenic temperature, and to study the microstructural and properties evolution after cryogenic severe plastic deformation. ...
Correlações entre microestrutura, parâmetros térmicos e propriedades mecânicas de ligas de alumínio da série 5xxx solidificadas unidirecionalmente
(Universidade Federal de São Carlos, 2017-08-04)
Processing high-Mg content Aluminum Alloys by continuous casting technics is considered an industry challenge. The present research aims to characterize 5xxx alloy series, considering composition based on the commercial ...
Otimização dos parâmetros de soldagem a ponto por Fricção (FSpW) da liga AlMgSc e avaliação das propriedades mecânicas estáticas e dinâmicas
(Universidade Federal de São Carlos, 2017-08-28)
Aluminum alloys are widely used in transportation industry to reduce structural weight and fuel consumption. The development of advanced alloys and more effective technologies for joining materials contribute to achieve ...
Estudo dos efeitos do biodiesel e suas misturas com óleo diesel em materiais metálicos
(Universidade Federal de São Carlos, 2017-03-09)
The use of biodiesel in vehicles can significantly reduce dependence on fossil fuels and help to reduce environmental pollution. However, there are concerns about the compatibility of automotive materials in contact with ...
Estudo da resistência à corrosão de ligas de alumínio com grãos ultrafinos obtidos por deformação plástica severa através do processo ECAP
(Universidade Federal de São Carlos, 2017-10-02)
The present work evaluated the effect of severe plastic deformation and ultrafine grains, obtained through the ECAP (equal-channel angular pressing) process, in the corrosion resistance of AA1050 aluminum alloy. The ...