Search
Now showing items 1-10 of 25
Avaliações e correlações das propriedades reológicas, mecânicas e de cinética de cristalização de polímeros utilizados em processo de impressão 3d por FFF
(Universidade Federal de São Carlos, 2018-09-03)
Recently there has been an interest increase in the additive manufacturing process (AM), Fused Filament Fabrication (FFF) is one of the most commercially important extrusion-based process. The success of this technology ...
Compatibilização química em compósitos de PLA reforçados com fibras de sisal
(Universidade Federal de São Carlos, 2018-07-13)
Even though poly(lactic acid) (PLA) is fragile under impact and has low toughness, the polymer stands out for its stiffness and high tensile strength. This polymer is an interesting material not only for short-term ...
Blendas de poli(tereftalato de etileno) e poliamida 66 modificadas com sepiolita
(Universidade Federal de São Carlos, 2018-03-02)
Blends of recycled bottle-grade polyethylene terephthalate and virgin polyamide
66 (PET/PA66) with different compositions (75/25, 50/50, 25/75) unfilled and filled
with 5 phr of sepiolite clay (Sep) were investigated. ...
Nanocompósitos de poliuretano comercial e nanopartículas híbridas de núcleo Fe3O4 funcionalizado com capa orgânica de Poli(1,4-Butanodiol)
(Universidade Federal de São Carlos, 2018-02-23)
The use of inorganic nanoparticles in polymer nanocomposites allows gain in mechanical resistance and new properties. However, the incorporation of organic layer functionalized nanoparticles alters the material’s properties ...
Desenvolvimento de Nanoblendas PLA/EVOH biodegradáveis com características de barreira a gases e vapores
(Universidade Federal de São Carlos, 2018-07-20)
Poly (lactic acid) (PLA) is a non-toxic, transparent and biodegradable aliphatic polyester, produced from renewable raw materials. This polymer meets several requirements for packaging applications, but is fragile and has ...
Ligas Sn-Ni: efeitos da taxa de resfriamento e da microestrutura nas propriedades mecânicas de tração
(Universidade Federal de São Carlos, 2018-02-28)
The present investigation examined the microstructural arrangements formed during the transient solidification of the eutectic Sn-0.2wt.%Ni and the hypereutectic Sn-0.5wt.%Ni alloys using two different substrates as mold ...
Friction surfacing of aluminum alloy 5083-H112 over AA 2024-T3
(Universidade Federal de São Carlos, 2018-03-23)
Friction surfacing (FS) is an advanced solid-state process in surface modification with increasing applications in reclaiming worn parts, hardfacing and corrosion protection. It is considered a derivation of the friction ...
Pesquisa em consolidação do fechamento de vazios internos em produtos forjados no aço W.Nr. 1.2738 modificado
(Universidade Federal de São Carlos, 2018-11-23)
During steel ingot solidification, internal voids are expected to be formed in its interior. Such voids, if they stay in the final product after the forging step, will hurt the performance and properties of the final ...
Otimização do processo de soldagem robotizada tandem GMAW do aço ASTM A572 G50
(Universidade Federal de São Carlos, 2018-10-31)
The tandem welding process employs double wire feed in a single torch,
providing increased deposition rate and consequent reduction in process times.
However, the process complexity increases because the correct combination ...
Nucleação transiente e estacionária em dissilicato de lítio
(Universidade Federal de São Carlos, 2018-05-29)
Glasses and supercooled liquids tend to crystallize below the melting temperature. Crystallization is a phase transformation where the atomic structure ceases to be non-crystalline and becomes periodic. The focus of this ...