Search
Now showing items 1-10 of 20
Estudo da cinética de cristalização não-isotérmica de nanocompósitos de PLA/Haloisita
(Universidade Federal de São Carlos, 2021-08-27)
Poly(lactic acid) (PLA) is a biodegradable and biocompatible thermoplastic obtained from renewable sources and with similar properties when compared with petroleum-based polymers. The inclusion of nanoparticles is an ...
Tubos em compósito de epóxi reforçado com fibra de vidro produzidos pelo processo de enrolamento filamentar para aplicação na indústria petroquímica
(Universidade Federal de São Carlos, 2021-11-25)
This work is focused on the production and mechanical performance evaluation of filament-wound flat plates and pipes using different composite compositions of three distinct commercial high glass transition epoxy resins ...
Reaproveitamento de resíduos da agroindústria da laranja para a produção de compostos biodegradáveis em matriz de PBS
(Universidade Federal de São Carlos, 2021-09-24)
The employment of biodegradable polymers is a partial solution to the problem of environmental plastic pollution, since conventional polymers are resistant to many environmental influences and it may take centuries for ...
Influência da nióbia no óxido de alumínio eletrofundido para aplicações abrasivas
(Universidade Federal de São Carlos, 2021-07-29)
Abrasives are materials that have as main characteristics their cutting and
grinding power. In its most common crystalline form, aluminum oxide, due to its
high melting point, high hardness and mechanical resistance, ...
Estabilidade microestrutural da liga Cu-0,8Cr-0,07Zr após extrusão em canal angular em temperatura criogênica
(Universidade Federal de São Carlos, 2021-12-20)
Severe Plastic Deformation (SPD) are well established routes with regard to the
intense microstructural refining of metals and alloys up to the submicrometer (<
1 μm) and/or nanometer (< 100 nm) scales. Lowering the ...
Influência da incorporação de negro de fumo e carbonato de cálcio micro e nanoparticulado nas propriedades reológicas, colorimétricas e mecânicas de filmes de polietileno de baixa densidade
(Universidade Federal de São Carlos, 2021-06-30)
In this work, the influence of incorporation of Carbon Black (CB) and CaCO3, both with different particle sizes, on the rheological, colorimetric and mechanical properties of LDPE films were studied. Three different types ...
Evolução de fases durante a hidratação do cimento portland brasileiro por difração de raios x
(Universidade Federal de São Carlos, 2021-03-03)
The physicochemical properties of cementitious materials are determined by the mineralogy and hydration process of the cement. In 2018, the ABNT NBR 16697 standard was published, unifying eight standards related to Portland ...
Elaboração e análise de indicadores bibliométricos de publicações na área de educação em engenharia de materiais
(Universidade Federal de São Carlos, 2021-11-08)
Engineering is directly related to the industrial and socioeconomic development of each country and region in which it operates, being a central area in its development. Indispensable to the present day, the engineering ...
Aspectos termodinâmicos e cinéticos do uso de plugues porosos para a remoção de partículas cerâmicas por bolhas inteligentes
(Universidade Federal de São Carlos, 2021-04-19)
Non-metallic inclusions can spoil the mechanical properties of the steel depending on their composition, geometry, size and distribution. In this context, “inclusion engineering” is a rising area in steelmaking industry ...
Development of ionic conductive cellulose mat by solution blow spinning and laser-induced graphene from pineapple nanocellulose for use in flexible electronic devices
(Universidade Federal de São Carlos, 2021-02-26)
In the face of environmental issues and aiming at electronic devices of
rapid production at low cost, this doctoral thesis proposed two new and
innovative approaches to obtain substrates, dielectrics, and electrodes from ...