Buscar
Mostrando ítems 1-10 de 20
Reciclagem de embalagens flexíveis multicamadas
(Universidade Federal de São Carlos, 2022-04-29)
Packaging industry is facing an important paradox in flexible plastic packaging for fresh food. While, food waste is avoided using multilayer and multi-material structures with barrier properties, that increase shelf life ...
Soldagem por ponto por fricção das ligas de alumínio 5A06-O/2219-T87: caracterização mecânica e microestrutural
(Universidade Federal de São Carlos, 2022-11-30)
Refill Friction Stir Spot Welding (RFSSW) is a solid-state joining technique for welding dissimilar and similar materials applied to light alloys and thermoplastics. Thus, the purpose of this work was to evaluate the ...
Processamento reativo de blendas de amido termoplástico/poli(butileno succinato) (TPS/PBS)
(Universidade Federal de São Carlos, 2022-08-11)
Thermoplastic starch is a natural and biodegradable polymer. However, it has some disadvantages attributed to its hydrophilic character, low mechanical properties and the phenomenon of retrogradation. These limitations can ...
Bibliometria e análise de conteúdo sobre o ensino por competências na educação em engenharia de materiais
(Universidade Federal de São Carlos, 2022-04-08)
Engineering education is a field of great importance, due to its ability to graduate strategic professionals to support the socioeconomic growth of the countries. Materials Engineering, for instance, emerged in Brazil with ...
Estudo ab initio das propriedades estruturais e eletrônicas de óxidos de tungstênio
(Universidade Federal de São Carlos, 2022-03-04)
In the last two decades, tungsten oxide (WO3) has been a target of the scientific and technological interest community due to its optical and magnetic properties, which finds important applications such as sensors, ...
Desenvolvimento e caracterização de biocompósitos de blendas TPU/PCL com hidroxiapatita para produção de scaffolds bioativos via impressão 3D
(Universidade Federal de São Carlos, 2022-08-02)
The increasing need for biological tissues to treat defects caused by disease or injury has demanded new solutions to provide functional substitutes that supply tissue shortages and suit the needs of each patient. In this ...
Atomização a gás do aço ferramenta A2: efeito dos parâmetros de processo nas características do pó
(Universidade Federal de São Carlos, 2022-03-23)
Gas atomization is the main method in powder metallurgy to produce powders for additive manufacturing (AM). The gas atomization process allows generally spherical and very fine metallic powders with great yield on the ...
Obtenção de filtros de celulose para aerossóis a partir de diferentes processos
(Universidade Federal de São Carlos, 2022-08-25)
Given the crisis due to the SARS-CoV-2 virus pandemic and the high demand for personal protective equipment (PPE), this master's project aimed to develop a process for manufacturing biodegradable filters from a renewable ...
Influência da adição de Nb-B na microestrutura de solidificação da liga Al-0,8%Mg-0,7%Si (6201)
(Universidade Federal de São Carlos, 2022-04-11)
The AA6201 alloy, widely used in the manufacturing of power cables, was modified by the addition of a Al-Nb-B master alloy in order to investigate the possible effects on the microstructure. Therefore, the Al-0.8%Mg-0.7%Si ...
Mapeamento de parâmetros de soldagem robotizada GMAW visando tempos de produção reduzidos para juntas do aço ASTM A572 G50
(Universidade Federal de São Carlos, 2022-09-15)
The welding process using electric arc with shielding gas (GMAW - Gas Metal Arc Welding) is extremely widespread and used in several applications. This is due to its high productivity combined with low cost in addition to ...