Buscar
Itens para a visualização no momento 1-10 of 20
Desenvolvimento de nanocompósitos de blendas PA6/ABS compatibilizadas com copolímeros funcionalizados
(Universidade Federal de São Carlos, 2014-09-22)
Nanocomposites based on polyamide 6 (PA6) and acrylonitrile-butadienestyrene
(ABS) blends compatibilized with styrene-maleic anhydride-acrylonitrile
(SANMA) and methyl methacrylate-maleic anhydride (MA-MMA) were prepared
by ...
Preparação e caracterização de nanocompósitos de LDPE e LDPE/EVA com partículas de Ag/TIO2 para aplicações antimicrobiais
(Universidade Federal de São Carlos, 2009-10-02)
This study investigated the use of a charger inorganic (titanium dioxide) as a support for silver nanoparticles and evaluated the use of material obtained as filler in polymer for antimicrobial application.Silver ...
Obtenção de nanocompósitos de poliamida 6 / argila nacional com diferentes agentes compatibilizantes
(Universidade Federal de São Carlos, 2005-09-01)
The formation of nanocomposites well exfoliated is dependent of several factors, like organic treatment with appropriate ammonium quaternary salts to promote adequate interaction between polymer and clay. The objective of ...
Compósitos e nanocompósitos de polietileno-celulose : efeito do tamanho e da composição da fibra e do processamento nas propriedades óticas e mecânicas dos filmes
(Universidade Federal de São Carlos, 2017-08-31)
In this study an aqueous dispersion of a polyethylene copolymer with a content of 6 wt% of acrylic acid was used as an alternative medium for incorporation of cellulosic fibers (FC), nanofibrils (NFC) and lignocellulosic ...
Desenvolvimento e caracterização de filmes tubulares de nanocompósitos de PEAD/EVA/argila organofílica
(Universidade Federal de São Carlos, 2008-03-10)
In this work, the use of ethylene-vinyl acetate copolymer (EVA) in substitution to compatibility agents normally employed in the production of high density polyethylene (HDPE) nanocomposites (such as polyethylene grafted ...
Monitoramento in-line da formação de nanocompósitos PP/MMT via intercalação no estado fundido
(Universidade Federal de São Carlos, 2008-08-04)
The aim of this work is to monitor in-line, using an optical detector fitted at the extruder die exit, the formation of PP/MMT nanocomposites during polymer melt compounding. The intensity of the detector´s signal is ...
Desenvolvimento de nanocompósitos poliméricos biodegradáveis a partir de pectina, amido e nanofibras de celulose
(Universidade Federal de São Carlos, 2010-09-16)
The objective of this project was the preparation of biodegradable films from polymer blends of citrus pectin (PEC) and thermoplastic starch (TPS) and the modification of its mechanical properties by formation of nanocomposites ...
Dispersão seletiva de argila montmorilonita em blendas poliméricas de PA6/ABS
(Universidade Federal de São Carlos, 2009-08-25)
For some applications toughening of polyamide is important. This can be accomplished through the addition of an elastomeric phase to the polyamide matrix with the drawback of a reduction in the stiffness and strength of ...
Estudo das propriedades reológicas de nanocompósitos para a produção de filmes tubulares
(Universidade Federal de São Carlos, 2008-07-08)
In this work, the use of rheological measurements in substitution or complementation to methods normally employed in the characterization of nanocomposites, such as X-ray diffraction (WAXS) and transmission electron ...
Nanocompósitos à base de MG: processamento, estrutura e propriedades de novos materiais para armazenagem de hidrogênio
(Universidade Federal de São Carlos, 2006-02-17)
Magnesium is light, abundant and it can store up to 7.6 wt. % of
hydrogen forming the hydride MgH2 and therefore it is a promising material for
hydrogen storage. However, the H-sorption occurs at relatively high
temperatures ...