Buscar
Mostrando ítems 1-10 de 24
Preparação e caracterização de nanocompósitos de LDPE e LDPE/EVA com partículas de Ag/TIO2 para aplicações antimicrobiais
(Universidade Federal de São Carlos, 2009-10-02)
This study investigated the use of a charger inorganic (titanium dioxide) as a support for silver nanoparticles and evaluated the use of material obtained as filler in polymer for antimicrobial application.Silver ...
Desenvolvimento e caracterização de blendas PHBV/Ecoflex® e suas modificações com amidos
(Universidade Federal de São Carlos, 2008-05-30)
Plastics materials produced from petrochemicals are widely used due to
their versatility, mechanical properties and low cost, but they cause environmental
impact as a consequence of the accumulation of great amount of ...
Obtenção de nanocompósitos de poliamida 6 / argila nacional com diferentes agentes compatibilizantes
(Universidade Federal de São Carlos, 2005-09-01)
The formation of nanocomposites well exfoliated is dependent of several factors, like organic treatment with appropriate ammonium quaternary salts to promote adequate interaction between polymer and clay. The objective of ...
Desenvolvimento e caracterização de blendas e de compostos empregando polímeros biodegradáveis
(Universidade Federal de São Carlos, 2004-10-25)
This work presents theoretical information and experimental data on the behavior of biodegradable polymers and blends of biodegradable PHB polymer with copolyesters that are also biodegradable. Binary mixtures were made ...
Processamento, caracterização e determinação do perfil de polarização do Poli(fluoreto de vinilideno)
(Universidade Federal de São Carlos, 2009-03-25)
This work characterized the ferroelectric polarization of the β-PVDF differentiating the individual contributions of the orientation and the crystalline phases in the remanent polarization of the PVDF. Those contributions ...
Monitoramento in-line da formação de nanocompósitos PP/MMT via intercalação no estado fundido
(Universidade Federal de São Carlos, 2008-08-04)
The aim of this work is to monitor in-line, using an optical detector fitted at the extruder die exit, the formation of PP/MMT nanocomposites during polymer melt compounding. The intensity of the detector´s signal is ...
Influência dos parâmetros de Processamento e da composição na morfologia de resinas ABS.
(Universidade Federal de São Carlos, 2004-08-24)
The present work is about the influence of processing parameter and composition on the morphology of acrylonitrile-butadiene-styrene (ABS)resins. The ABS grades chosen are commercial products with high rubber content, i. ...
Dispersão seletiva de argila montmorilonita em blendas poliméricas de PA6/ABS
(Universidade Federal de São Carlos, 2009-08-25)
For some applications toughening of polyamide is important. This can be accomplished through the addition of an elastomeric phase to the polyamide matrix with the drawback of a reduction in the stiffness and strength of ...
Caracterização físico-química de PET ramificado e de suas blendas com PET reciclado
(Universidade Federal de São Carlos, 2004-05-10)
The growing concern with the solid residues management, observed in the last decade, due to its huge amount and impact, has motivated the search for recycling processes, where these residues can be reprocessed to generate ...
Estudo e desenvolvimento de blendas ternárias biodegradáveis a partir de poli(ácido lático), poli(álcool vinílico) e quitosana
(Universidade Federal de São Carlos, 2010-04-08)
The present study examined the use of poly(vinyl alcohol) as a compatibilizing agent between chitosan and PLA and as a diluent for chitosan in an approach where a dispersion chitosan in PVA produced by solution blending ...