Buscar
Itens para a visualização no momento 171-180 of 273
Influência de defeitos nas propriedades mecânicas de juntas soldadas por FSW da liga AA6013-T6
(Universidade Federal de São Carlos, 2009-04-28)
In 1991, it was developed a solid state welding process called Friction Stir Welding - FSW, intended to increase the number of applications for the aluminum and its alloys. As every welding process the presence of defects ...
Desenvolvimento de um método para levantamento de tecnologias de materiais empregados no trem de força automotivo (powertrain) a partir de patentes
(Universidade Federal de São Carlos, 2012-05-27)
This research approaches the study from patents of technologies for materials used in power train of motor vehicles, to provide additional information in order to support decision making in this universe, especially in the ...
Caracterização do comportamento de desgaste de cerâmicas de alumina densa : efeitos de parâmetros do ensaio do tipo pino no disco
(Universidade Federal de São Carlos, 2010-12-08)
Searching for wear resistant materials, attention has been paid to Si3N4, SiC, Al2O3 and ZrO2 ceramics due to their better properties as compared to other materials. Although ceramic are brittleness, improvements on the ...
Obtenção e caracterização elétrica de filmes finos de SnO2:Sb
(Universidade Federal de São Carlos, 2011-03-03)
The growing demand for advanced electronic devices based on nanomaterials has motivated efforts to produce nanoscale building blocks with designed functions. Transparent conducting oxide nanocrystals (TCONs) are particularly ...
Simulação computacional, projeto, construção e análise do desempenho de uma matriz para extrusão em canal angular dedicada ao processamento de chapas
(Universidade Federal de São Carlos, 2012-08-29)
The present work describes the design, construction and testing of an equal channel angular pressing (ECAP) die characterized by rectangular cross section channels. The main parameter of the ECAP dies is the geometry of ...
Fornos para fusão e espera para indústria de alumínio : caracterização de materiais refratários e conservação de energia
(Universidade Federal de São Carlos, 2012-07-26)
The industrial need to reduce energy consumption is part of a continuous evolution towards higher levels of sustainability and competitiveness. Considering these aspects, the search for alternatives to improve the performance ...
Avaliação da durabilidade de argamassas e pastas de cimentos do tipo Portland preparados com um clínquer contendo resíduo de bauxita como matéria-prima
(Universidade Federal de São Carlos, 2012-08-07)
The structures of Portland cement are frequently exposed to aggressive environments, which can lead to their degradation. Thus, the study of durability is very important to avoid damages caused by early failures as well ...
Erosimetria a quente: equipamento, adequações e correlações dos valores obtidos com as propriedades de concretos refratários
(Universidade Federal de São Carlos, 2011-05-09)
The erosion wear is a mechanism that results in the removal of material from the surface by erosive particles. In some applications, such as calciners used in the aluminum industry and risers of the petrochemical industry, ...
Desenvolvimento de compostos poliméricos biodegradáveis modificados com cargas e fibras naturais vegetais
(Universidade Federal de São Carlos, 2010-08-02)
Due to environmental and economical concerns, the study and utilization of raw materials coming from natural renewable resources have grown significantly in the last years. The utilization of biodegradable polymers has ...
Desenvolvimento de compósito de policloreto de vinila (PVC) reforçado com fibra de vidro
(Universidade Federal de São Carlos, 2012-08-06)
This work was focused on the evaluation of the interface between short fiber glass and polymeric matrix of the PVC composites using four different sizings as fiber superficial treatment. The interface analysis was done ...