Buscar
Itens para a visualização no momento 61-70 of 456
Obtenção de biovitrocerâmicas por cristalização controlada do vitro 1Na2O.2CaO.3SiO2.
(Universidade Federal de São Carlos, 2003-09-16)
Glass-ceramics used as implant in tissue attachment bioactive classification type, show better mechanical strength than related glasses or ceramics, but without significant bioactivity loss. It was not analysed the bioactivity ...
Desenvolvimento e caracterização de blendas PHBV/Ecoflex® e suas modificações com amidos
(Universidade Federal de São Carlos, 2008-05-30)
Plastics materials produced from petrochemicals are widely used due to
their versatility, mechanical properties and low cost, but they cause environmental
impact as a consequence of the accumulation of great amount of ...
Avaliação da resistência à corrosão da liga 2024-T351 soldada por FSW Friction Stir Welding
(Universidade Federal de São Carlos, 2007-09-14)
The corrosion resistance of aluminum alloy can be impaired due to
intermetallic precipitation during thermal treatment to improve mechanical
properties. This work investigates the corrosion resistance of aluminum alloy
2024-T351 ...
Crescimento de grãos anômalos em titanato de bário.
(Universidade Federal de São Carlos, 2004-04-05)
Barium Titanate (BaTiO3) and derived material are extensively used in the manufacture for a large range of electronic components like multilayer ceramic capacitors (MLCC), semi-conductor devices, PTCR (positive ...
Obtenção de nanocompósitos de poliamida 6 / argila nacional com diferentes agentes compatibilizantes
(Universidade Federal de São Carlos, 2005-09-01)
The formation of nanocomposites well exfoliated is dependent of several factors, like organic treatment with appropriate ammonium quaternary salts to promote adequate interaction between polymer and clay. The objective of ...
Estudo das propriedades mecânicas de cabos condutores elétricos de tipo CAA usados e sua adequação ao retracionamento.
(Universidade Federal de São Carlos, 2005-10-24)
Influência da compatibilização interfacial seletiva nas propriedades mecânicas de compósitos híbridos ternários de PET/fibra de vidro/elastômeros olefínicos reativos
(Universidade Federal de São Carlos, 2009-09-25)
Poly(ethylene terephthalate) (PET) is a semi-crystalline thermoplastic widely used for packaging of aereted soft drinks, which makes the recycling of post-consumer PET material necessary to prevent the negative environmental ...
Comportamento térmico e mecânico de resinas termocuráveis para aplicação como revestimento adesivo em fios esmaltados
(Universidade Federal de São Carlos, 2010-04-01)
Selfbonding magnet wires are composed by two or more polymeric cover layers, being the inner layers thermosetting and the over coat composed of a thermoplastic cross-linkable layer. These wires are used in several magnetic ...
Concretos refratários aluminosos espinelizados
(Universidade Federal de São Carlos, 2008-04-10)
The increasing steelmaking production level in association with the steel quality requirements led to the use of high performance materials. In this context, the use of refractory castables increased, due to their production ...
Análise estrutural de filmes finos de hematita produzidos por spin-coating para geração de hidrogênio
(Universidade Federal de São Carlos, 2010-08-06)
Water photolysis at semiconductors is a clean and renewable method for solar energy conversion into hydrogen fuel. Hematite (-Fe2O3) thin films have been presented as a promissory material for water photolysis due ...