Buscar
Mostrando ítems 1-10 de 11
Desenvolvimento e caracterização de biocompósitos de blendas TPU/PCL com hidroxiapatita para produção de scaffolds bioativos via impressão 3D
(Universidade Federal de São Carlos, 2022-08-02)
The increasing need for biological tissues to treat defects caused by disease or injury has demanded new solutions to provide functional substitutes that supply tissue shortages and suit the needs of each patient. In this ...
Influência da incorporação de negro de fumo e carbonato de cálcio micro e nanoparticulado nas propriedades reológicas, colorimétricas e mecânicas de filmes de polietileno de baixa densidade
(Universidade Federal de São Carlos, 2021-06-30)
In this work, the influence of incorporation of Carbon Black (CB) and CaCO3, both with different particle sizes, on the rheological, colorimetric and mechanical properties of LDPE films were studied. Three different types ...
Desenvolvimento e caracterização de concretos refratários ligados quimicamente por fosfatos para aplicação em indústrias petroquímicas
(Universidade Federal de São Carlos, 2017-10-05)
The objective of this work was the development of chemically phosphatebonded
refractories for applications in petrochemical industries due to their
suitable properties such as high green mechanical strength, erosion ...
Compatibilização química em compósitos de PLA reforçados com fibras de sisal
(Universidade Federal de São Carlos, 2018-07-13)
Even though poly(lactic acid) (PLA) is fragile under impact and has low toughness, the polymer stands out for its stiffness and high tensile strength. This polymer is an interesting material not only for short-term ...
Estudo da incorporação de nanopartículas de óxido de zinco e pentóxido de nióbio em polietileno linear de baixa densidade
(Universidade Federal de São Carlos, 2019-03-29)
Linear low-density polyethylene (LLDPE) is one of the most widely used materials in greenhouse covering, due to its low cost and transparency to photosynthetically active radiation up to 80%. However, this polymer also ...
Estudo da viabilidade técnica do reaproveitamento de altos teores de fibras de poli(para-aramida) como reforço mecânico em poliamida 66
(Universidade Federal de São Carlos, 2018-10-26)
Responsible for an annual demand higher than 70 millions of tons, the poly(para- aramide) fibers are being widely used in the safety, automobilist, aeronautic, and petroleum industries, due to their attractive mechanical, ...
Seleção de aditivos de sinterização e processamento cerâmico visando otimização da microestrutura do eletróllto sólido BaZr0,8Y0,2O3-δ
(Universidade Federal de São Carlos, 2018-11-12)
In this thesis, we investigated the production of Yttrium-doped Barium Zirconate
proton-conducting electrolytes with 20 at.% of Yttrium (BaZr0.8Y0.2O3-δ) via solid state
reaction. The great challenge presented by this ...
Estudo dos efeitos da substituição de Feldspato por Filito em massas de porcelanato
(Universidade Federal de São Carlos, 2018-11-21)
Porcelain stoneware tiles, porcelanatos, present excellent technical and aesthetic characteristics. In Europe, the bodies used in the manufacture of porcelain and porcelanatos are based on the classic triaxial ceramic, ...
Estudo de microscopia eletrônica de transmissão in situ de nanoestrutura de óxidos mistos em altas temperaturas
(Universidade Federal de São Carlos, 2018-09-19)
This work addresses the characterization of the high temperature reactions between different nanoparticles oxides, CeO2-ZrO2 and CeO2-SnO2, by the direct observation of the phenomenon by in situ Transmission Electron ...
Blendas de amido termoplástico e PBAT processadas com auxílio da pulverização por cisalhamento no estado sólido
(Universidade Federal de São Carlos, 2018-02-07)
The use of biodegradable materials arise as a potential alternative for reducing environmental polution. For being found in abundance, low cost, biodegradable and provided from renewable source, starch has been a ...