Search
Now showing items 21-30 of 47
Mg-containing multicomponent alloys produced by high-energy ball milling for hydrogen storage
(Universidade Federal de São Carlos, 2020-02-20)
Hydrogen is a promising energy carrier that allows the use of energy in a sustainable form. However, safe and efficient hydrogen storage is a scientific and technological challenge that still has to be overcome. Recently ...
Influência da adição de cério na microestrutura e comportamento de oxidação de aços inoxidáveis Fe-Mn-Si-Cr-Ni com efeito de memória de forma
(Universidade Federal de São Carlos, 2020-01-15)
In this study, the influence of small cerium additions on the microstructure and
oxidation behavior of Fe-Mn-Si-Cr-Ni shape memory stainless steels (SMSSs)
was investigated. The results show that the Ce addition in the ...
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...
Efeito do revenimento sobre a resistência à corrosão do aço inoxidável uns s41426
(Universidade Federal de São Carlos, 2020-02-28)
Supermartensitic stainless steels were developed during the 1990s as an alternative to duplex stainless steels for manufacture of oil country tubular goods. As a result of microstructural variations caused during tempering ...
Estudo da viabilidade de formação de nitreto de boro em aços inoxidáveis ferríticos
(Universidade Federal de São Carlos, 2020-03-02)
Since the 90s, the petroleum industry has been conducting research on alloys that are wear and corrosion resistant once several equipment parts used in the oil exploitation, extraction and production, such as pipes, joints, ...
Manufatura aditiva da liga reciclada Al-Fe-Cr-Ti formadora de fase quasicristalina
(Universidade Federal de São Carlos, 2020-02-27)
The precipitation of quasicrystalline phase in an α-Al dendritic matrix provides Al-based alloys with high mechanical and wear resistance, mainly at high temperatures, which are promising for applications as automotive and ...
Design of high entropy alloys for hydrogen storage: study of the Mg-V-Al-Cr-Ni, Mg-Al-Ti-Mn-Nb and Ti-V-Nb-Cr systems
(Universidade Federal de São Carlos, 2021-05-21)
The advent of high entropy alloys (HEA) has brought new opportunities and challenges to metallurgy. Due to extensive compositional field of HEAs, the possibility of controlling properties in a composition-driven approach ...
Study of bioactivity, corrosion resistance and fatigue behavior of Ti-12Mo-6Zr-2Fe alloy after different surface treatments
(Universidade Federal de São Carlos, 2020-11-19)
Demand for new implants with improved bioactivity, corrosion resistance, and optimal mechanical properties has been increasing considerably. In this sense, different surface treatments are applied in titanium alloys to ...
Equilíbrio de fases e propriedades mecânicas da liga de elemento multiprincipal Cr40Co40Ni20
(Universidade Federal de São Carlos, 2021-02-19)
In the pursuit for materials with improved performance, multi-principal element alloys (MPEAs) attract the interest of the scientific community, due to their large composition space. Some Cr-Co-Ni alloys stand out with ...
Refill friction stir spot welding of different thickness Al-Cu alloy using a tool with reduced dimensions for aerospace application
(Universidade Federal de São Carlos, 2020-11-12)
Refill Friction Stir Spot Welding has grown as an interesting alternative to conventional joining techniques in recent years, especially when it comes to high strength aluminum alloys. Although current results show promise, ...