Search
Now showing items 91-100 of 102
Otimização da condutividade iônica de vitrocerâmicas condutoras por íon sódio: controle microestrutural e busca de novas composições
(Universidade Federal de São Carlos, 2020-04-03)
Sodium-based materials are promising candidates for manufacturing stationary storage devices such as batteries due to their low cost and the Na high redox potential. However, the corrosion, flammability, and the degradation ...
Desempenho de filmes soprados multicamada de blendas de polipropileno e copolímeros de etileno
(Universidade Federal de São Carlos, 2012-08-30)
Polypropylene (PP) and polyethylene (PE) are widely used in the flexible packaging market individually as mono or multilayer films. Blending PP and PE in coextruded films has shown limited commercial applications due to ...
Sistemas nanoestruturados condutores baseados em nanocompósitos poliméricos condutores e mantas eletrofiadas condutoras
(Universidade Federal de São Carlos, 2013-05-10)
In this work its was investigated the influence of the processing on the electrical and dielectric properties of nanostructured polymeric systems obtained by differents techniques. The morphology and structure of the ...
Deformação em canal angular de uma liga Al-4%Cu: efeito dos mecanismos de endurecimento na resistência mecânica e ductilidade
(Universidade Federal de São Carlos, 2011-03-03)
Internal boundaries hardening and precipitation hardening are two important mechanisms acting in metallic alloys. The former has special relevance when the grain size is reduced ...
Influence of surface treatments on corrosion resistance properties of ultrafine grained titanium alloys for biomedical applications
(Universidade Federal de São Carlos, 2019-08-09)
Titanium and its alloys are used as biomaterials because their excellent combination of high corrosion resistance, low modulus of elasticity and biocompatibility. However, titanium and its alloys cannot meet all the clinical ...
Estudo da indução da grafitização da resina fenólica fenol/formaldeído
(Universidade Federal de São Carlos, 2019-08-14)
Among the probable carbon sources, there are the polymers, as the phenolic resin, which produces residual carbon around 60% wt./wt. after thermal treatment. It is classified as non-graphitizable, because it has not graphitic ...
Influência da adição de cério na resistência à corrosão e efeito de memória de forma em ligas Fe-Mn-Si-Cr-Ni-(Ce)
(Universidade Federal de São Carlos, 2020-09-03)
The interest in scientific and technological development of Fe-Mn-Si-Cr-Ni shape memory alloys is increasing in the last years. The improvement of key properties of theses alloys should enable its use in different applications, ...
Mineração de textos de patentes para monitoramento tecnológico, identificação de aplicações e seleção de materiais: estudo de caso em desenvolvimentos de aços
(Universidade Federal de São Carlos, 2020-11-26)
The growing number of options in materials leads to increasing complexity of the process to select the most suitable to perform a function in a product or to choose a competitive application for a newly developed material. ...
Produção de recobrimentos resistentes ao desgaste através de laser cladding de pós das ligas amorfizáveis fe-co-nb-b-(y)
(Universidade Federal de São Carlos, 2020-07-28)
Industrial components can be subjected to a high level of surface wear it
necessary to search for new wear-resistant alloys to improve the performance
and safety of the components. The objective of this work was to produce ...
Estudo do comportamento mecânico das ligas de titânio beta metaestável TMZF e Ti15%Mo durante processamento termomecânico
(Universidade Federal de São Carlos, 2020-10-02)
Stress-strain curves of two metastable beta titanium alloys, the Ti-15%Mo alloy and the TMZF alloy were evaluated. The curves were obtained from isothermal hot compression tests in a temperature range from 650 to 900 ° C, ...