Search
Now showing items 11-20 of 102
Monitoramento in/on-line da malaxagem na extrusão: hidrólise e extensão de cadeia do poli(tereftalato de etileno) e fusão do polipropileno
(Universidade Federal de São Carlos, 2020-08-14)
During twin-screw extrusion, understanding and quantifying the behaviour of molten polymers under different conditions is limited by the complex configuration of the equipment. Due to this fact, real-time extrusion monitoring ...
Comportamento mecânico em fadiga da liga de titânio beta metaestável Ti-5553
(Universidade Federal de São Carlos, 2016-10-14)
The microstructure of metastable beta Ti alloys is a decisive factor that
governs their properties and, therefore, the assessment of the relation between
the microstructure and the fatigue response means an advance in ...
Abordagem termodinâmica do transporte iônico e da relaxação estrutural em vidros fosfatos de prata
(Universidade Federal de São Carlos, 2016-09-12)
Ionic conductivity in glasses was first discovered and demonstrated by
Warburg in 1884, but although it has been studied for over a century, the
mechanisms underlying ionic conduction in glasses are not yet entirely ...
Estudo do processo de soldagem a ponto por fricção de juntas dissimilares entre ligas de alumínio e titânio
(Universidade Federal de São Carlos, 2016-12-09)
Multimaterial structures between aluminum and titanium alloys are a
technologically attractive field of research and their increasing use in the
transportation sector for weight and emission reduction is part of the ...
Identificação das variáveis que ocasionam a variação de tonalidade utilizando a técnica de decoração por cilindros de silicone gravados a laser
(Universidade Federal de São Carlos, 2015-11-30)
A major problem in the production of ceramic tiles for coating is the variation of
tonality. The determination of their origin within the entire production process and to
minimize its occurrence by the manufacturer is ...
Zircônia CO-dopada por compensação de cargas nos sistemas (ZrO2)1-(x+y)(InO1,5)x(MOz)y com MOz = TaO2,5, NbO2,5, MoO3 ou WO3, como revestimento para barreira térmica
(Universidade Federal de São Carlos, 2016-09-30)
InO1.5-stabilized zirconia (InSZ) is a potential hot corrosion resistant thermal
barrier coating (TBC). However, the thermal instability prevents real applications
of InSZ-based TBC. This thesis investigates the hypothesis ...
Utilização de concentrados de eva-argila organofílica obtidos por spray drying, drais e extrusão no desenvolvimento de nanocompósitos poliméricos
(Universidade Federal de São Carlos, 2014-12-15)
The objective of this work was the development of polymer
nanocomposites with montmorillonite organoclays (OMMT) using EVA-OMMT
concentrated obtained by spray drying, Drais and extrusion, making the
characterization and ...
Aplicação do método biomimético para o recobrimento da liga AZ91 com apatitas para aumento da resistência à corrosão
(Universidade Federal de São Carlos, 2015-08-28)
In orthopedic medicine and traumatology, the use of implants to help bone reconstitution is very common. They are divided in two groups: Internal and external fixation devices. After bone reconstitution, these components ...
Comportamento elétrico de nanocompósitos baseados em copolímeros em bloco e nanotubos de carbono
(Universidade Federal de São Carlos, 2017-06-23)
In this work conductive polymer nanocomposites (CPNs) based on block copolymers and multi walled carbon nanotubes (MWCNT) were obtained. Two of the copolymers were commercial: polystyrene-b-polybutadiene-b-polystyrene ...
Sinterização por micro-ondas em uma e em duas etapas de varistores à base de ZnO
(Universidade Federal de São Carlos, 2013-09-30)
This thesis is aimed at one-step microwave sintering at frequencies of 2.45 GHz and 30 GHz and the development of two-step microwave sintering (MW-TSS) at 2.45 GHz of ZnO-based nanostructured semiconductor compositions for ...