Buscar
Mostrando ítems 401-410 de 427
Analysis of tool traverse speed in Friction Stir Welding of AZ31 Magnesium alloy thin plates
(Universidade Federal de São Carlos, 2021-02-25)
The automotive industry's great interest in lightweight materials, such as
magnesium alloy AZ31, reflects the growing importance of reducing cars' weight.
One of the challenges of using such alloys is that their welding ...
Influência da adição de cério na resistência à corrosão e efeito de memória de forma em ligas Fe-Mn-Si-Cr-Ni-(Ce)
(Universidade Federal de São Carlos, 2020-09-03)
The interest in scientific and technological development of Fe-Mn-Si-Cr-Ni shape memory alloys is increasing in the last years. The improvement of key properties of theses alloys should enable its use in different applications, ...
Mineração de textos de patentes para monitoramento tecnológico, identificação de aplicações e seleção de materiais: estudo de caso em desenvolvimentos de aços
(Universidade Federal de São Carlos, 2020-11-26)
The growing number of options in materials leads to increasing complexity of the process to select the most suitable to perform a function in a product or to choose a competitive application for a newly developed material. ...
Armazenagem eletroquímica de hidrogênio: um estudo do comportamento dos metais Pd, Nb e V
(Universidade Federal de São Carlos, 2020-07-22)
Developing safe, reliable, efficient and cost-effective methods for hydrogen storage is a scientific and technological challenge. Among possible methods to store hydrogen, storing it in tanks in the liquid or compressed ...
Produção de recobrimentos resistentes ao desgaste através de laser cladding de pós das ligas amorfizáveis fe-co-nb-b-(y)
(Universidade Federal de São Carlos, 2020-07-28)
Industrial components can be subjected to a high level of surface wear it
necessary to search for new wear-resistant alloys to improve the performance
and safety of the components. The objective of this work was to produce ...
Influência da taxa de resfriamento no módulo de elasticidade de ligas beta Ti e obtenção de diagramas CCT
(Universidade Federal de São Carlos, 2019-07-31)
The metallic alloys used as orthopedic implants, such as the Ti-6Al-4V, present some problems of biological and mechanical compatibility. In addition, the great difference between the elastic modulus of human bone and the ...
Avaliação das microestruturas de solidificação e propriedades de aplicação de ligas monotéticas Al-Bi, Al-Bi-Cu e Al-Bi-Zn
(Universidade Federal de São Carlos, 2021-06-16)
Monotectic Al-based ternary alloys can result in a good combination of wear resistance and mechanical strength. While the soft self-lubricating elements contribute to an appropriate wear resistance, modification with third ...
Estudo do comportamento mecânico das ligas de titânio beta metaestável TMZF e Ti15%Mo durante processamento termomecânico
(Universidade Federal de São Carlos, 2020-10-02)
Stress-strain curves of two metastable beta titanium alloys, the Ti-15%Mo alloy and the TMZF alloy were evaluated. The curves were obtained from isothermal hot compression tests in a temperature range from 650 to 900 ° C, ...
Influência da adição de Co e Ni e da taxa de resfriamento na microestrutura de solidificação, nas propriedades mecânicas e na corrosão de ligas Al-Si-Cu-Zn-Fe
(Universidade Federal de São Carlos, 2022-11-28)
An important strategy by 2050 will be to transform the production of recycled Al-Si alloys as a viable and sustainable source to reach the global demand for Al. The challenge will be to mitigate the deleterious effects ...
Nano céria dopada com gadolínia: condutividade elétrica e correlação com a micro e nanoestrutura
(Universidade Federal de São Carlos, 2013-04-11)
Solid Oxide Fuel Cells (SOFCs) are clean and efficient energy conversion devices, considered as one of the key enabling technologies for future hydrogen economy and for stationary power generation. However novel materials ...