Buscar
Itens para a visualização no momento 11-19 of 19
Desenvolvimento de compósito de policloreto de vinila (PVC) reforçado com fibra de vidro
(Universidade Federal de São Carlos, 2012-08-06)
This work was focused on the evaluation of the interface between short fiber glass and polymeric matrix of the PVC composites using four different sizings as fiber superficial treatment. The interface analysis was done ...
Carvão vegetal: desenvolvimento de indicadores tecnológicos a partir da análise de documentos de patentes
(Universidade Federal de São Carlos, 2013-08-30)
Charcoal is an important renewable source of energy and feedstock for several applications. Its consumption, production and utilization are known by human kind for many years and have been increasing over time. The constant ...
Estudo de vida em fadiga de parafusos pediculares revestidos com hidroxiapatita
(Universidade Federal de São Carlos, 2013-08-30)
The search for new materials or changes in the manufacture process for the surgical implant companies have been considered one the most challenging issues for the engineering in order to supply high performance products ...
Tendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporário
(Universidade Federal de São Carlos, 2011-10-24)
Mg alloys have attracted attention as potential implant material because of their good mechanical properties, biocompatibility and biodegradation properties. However corrosion of these alloys causes intense release of ...
Caracterização da fabricação e uso de compósitos poliméricos contendo fibras naturais com ênfase no polipropileno/sisal a partir da análise de documentos de patentes
(Universidade Federal de São Carlos, 2012-01-24)
Natural fibers have became important as substitute for synthetic fiber reinforcement and filling in polymer composites, looking for better properties, lower cost and appeal of sustainability. To do so, there are challenges ...
CeO2 - 10% MOL Gd2O3: efeito da codopagem com X% MOL Sm2O3 (O5 X 52) na microestrutura e na condutividade elétrica
(Universidade Federal de São Carlos, 2011-09-16)
Fuel cells are the most promising technology for producing clean energy. In particular, the Solid Oxide Fuel Cell (SOFC) stands out among the various types due to high efficiency at high temperatures (800 ~ 1000°C) resulting ...
Produção e caracterização de recobrimentos de aço, empregando a liga amorfizável Fe-Cr-Nb-B
(Universidade Federal de São Carlos, 2012-02-13)
The equipments used to oil flow are submitted in an aggressive environment with the presence of hydrogen sulphide, carbon dioxide and sand, which contribute to corrosion and wear of the surface. To resist of these requests ...
Caracterização microestrutural e mecânica da liga de Al AA7050 reciclada por conformação por spray e extrusão
(Universidade Federal de São Carlos, 2013-01-22)
Aluminium alloys of the 7000 series are widely used in structural components in the aircraft industries due to their high strength and low density. However, a large amount of scraps is generated by the machining of the ...
Estudo da cinética de oxidação em altas temperaturas da liga SV15 aplicada na fabricação de sedes de válvulas de escape de motores automotivos
(Universidade Federal de São Carlos, 2014-04-14)
The SV15 alloy is applied in the production of the exhaust valve seats of automotive engines. The conditions of service in which the part is submitted require materials resistant to oxidation because of high temperature ...