Buscar
Mostrando ítems 21-30 de 30
Estudo de vida em fadiga de parafusos pediculares revestidos com hidroxiapatita
(Universidade Federal de São Carlos, 2013-08-30)
The search for new materials or changes in the manufacture process for the surgical implant companies have been considered one the most challenging issues for the engineering in order to supply high performance products ...
Laminação em atmosfera inerte de ligas à base de magnésio para armazenagem de hidrogênio
(Universidade Federal de São Carlos, 2014-08-08)
In recent decades, the use of energy presented strong growth due to the need of supplying the daily energy consumption of approximately seven billion people. To solve this problem, it has been investigated the nature, ...
Highly porous geopolymers: effect of the processing route on the reached properties
(Universidade Federal de São Carlos, 2015-02-10)
Os geopolímeros (polímeros inorgânicos) têm atraído a atenção da academia por várias razões, em particular pelo fato de ser considerado um material sustentável onde subprodutos industriais podem ser utilizados como matéria ...
Tendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporário
(Universidade Federal de São Carlos, 2011-10-24)
Mg alloys have attracted attention as potential implant material because of their good mechanical properties, biocompatibility and biodegradation properties. However corrosion of these alloys causes intense release of ...
Caracterização da fabricação e uso de compósitos poliméricos contendo fibras naturais com ênfase no polipropileno/sisal a partir da análise de documentos de patentes
(Universidade Federal de São Carlos, 2012-01-24)
Natural fibers have became important as substitute for synthetic fiber reinforcement and filling in polymer composites, looking for better properties, lower cost and appeal of sustainability. To do so, there are challenges ...
CeO2 - 10% MOL Gd2O3: efeito da codopagem com X% MOL Sm2O3 (O5 X 52) na microestrutura e na condutividade elétrica
(Universidade Federal de São Carlos, 2011-09-16)
Fuel cells are the most promising technology for producing clean energy. In particular, the Solid Oxide Fuel Cell (SOFC) stands out among the various types due to high efficiency at high temperatures (800 ~ 1000°C) resulting ...
Produção e caracterização de recobrimentos de aço, empregando a liga amorfizável Fe-Cr-Nb-B
(Universidade Federal de São Carlos, 2012-02-13)
The equipments used to oil flow are submitted in an aggressive environment with the presence of hydrogen sulphide, carbon dioxide and sand, which contribute to corrosion and wear of the surface. To resist of these requests ...
Caracterização microestrutural e mecânica da liga de Al AA7050 reciclada por conformação por spray e extrusão
(Universidade Federal de São Carlos, 2013-01-22)
Aluminium alloys of the 7000 series are widely used in structural components in the aircraft industries due to their high strength and low density. However, a large amount of scraps is generated by the machining of the ...
Estudo da cinética de oxidação em altas temperaturas da liga SV15 aplicada na fabricação de sedes de válvulas de escape de motores automotivos
(Universidade Federal de São Carlos, 2014-04-14)
The SV15 alloy is applied in the production of the exhaust valve seats of automotive engines. The conditions of service in which the part is submitted require materials resistant to oxidation because of high temperature ...
O uso de um vidro altamente bioativo para conferir bioatividade à superfície do titânio: desenvolvimento de um método para recobrimentos descontínuos
(Universidade Federal de São Carlos, 2013-03-15)
Bioactive glasses - or glass-ceramics, exhibit the largest known bioactivity index due to their osteoinductive property - among others. Theirs bonding to bone is also one of the strongest known, but they have poor mechanical ...