Buscar
Itens para a visualização no momento 1-10 of 13
Soldagem por ponto por fricção das ligas de alumínio 5A06-O/2219-T87: caracterização mecânica e microestrutural
(Universidade Federal de São Carlos, 2022-11-30)
Refill Friction Stir Spot Welding (RFSSW) is a solid-state joining technique for welding dissimilar and similar materials applied to light alloys and thermoplastics. Thus, the purpose of this work was to evaluate the ...
Microestrutura e propriedades mecânicas de vitrocerâmicos do sistema Li2O – CaO – SiO2
(Universidade Federal de São Carlos, 2013-03-12)
An interesting characteristic of the Li2O-CaO-SiO2 glass-forming system is the possibility of obtaining certain crystalline phases and morphologies that may lead to tough glass-ceramics. However, very few published works ...
Influência da microestrutura na resistência mecânica de ligas hipereutéticas Al-Si solidificadas direcionalmente
(Universidade Federal de São Carlos, 2017-01-18)
The present research work deals with directional solidification (DS) of Al-15wt.% and 18wt.% Si alloys and further characterization of the related microstructures. Emphasis is given on the eutectic growth being affected ...
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação de ligas com alto teor de cobre Al-(x)%Cu-7%Si
(Universidade Federal de São Carlos, 2019-02-26)
Ternary Al-15%Cu-7%Si and Al-22%Cu-7%Si alloys specimens were obtained by transient directional solidification (DS). This technique is able to provide a very large range of cooling rates and microstructures to be correlated ...
Crescimento super e subcrítico de trincas em vidros e vitrocerâmicos analisado via indentacão
(Universidade Federal de São Carlos, 2012-07-02)
In this dissertation we quantified properties that may better describe the mechanical behaviour of different glasses and glass-ceramics of the Na2O-CaO-SiO2-P2O5 system, based on the Biosilicate®chemical composition developed ...
Evolução microestrutural e propriedades mecânicas decorrentes da solidificação das ligas Al-11%Si-xCu
(Universidade Federal de São Carlos, 2018-11-21)
Al-Si-Cu ternary alloys are highly used and recommended to produce joints of aluminum alloys using brazing process. Dissimilar joints between these alloys and stainless steels, carbon steels and low alloy steels can also ...
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...
Influence of Bobbin Tool Friction Stir Welding (BT-FSW) variants on the microstructure and properties of AA2060 and AA2196 aluminum alloys
(Universidade Federal de São Carlos, 2020-06-18)
In order to reduce total costs in aircrafts production, operation and maintenance, materials and processing techniques have been continuously further optimized. In this scenario, aluminum-lithium alloys have been studied ...
Mechanical properties and metallurgical characterization of AA6082-T6 alloy welded by refill friction stir spot welding
(Universidade Federal de São Carlos, 2019-07-30)
The efforts to produce automobiles with intense use of aluminum alloys is growing and the 6XXX series of aluminum alloys are important for this scenario. However, the current joining technologies applied in these alloys ...
Equilíbrio de fases e propriedades mecânicas da liga de elemento multiprincipal Cr40Co40Ni20
(Universidade Federal de São Carlos, 2021-02-19)
In the pursuit for materials with improved performance, multi-principal element alloys (MPEAs) attract the interest of the scientific community, due to their large composition space. Some Cr-Co-Ni alloys stand out with ...